Netgear WN802Tv2 Reference Manual - Page 47
Configuring WPA2-PSK, Configuration, Security, Settings, Network Authentication, WPA-PSK, Encryption
UPC - 606449058505
View all Netgear WN802Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
NETGEAR Wireless-N Access Point WN802T v2 Reference Manual To configure WPA-PSK: 1. From the Configuration menu select Security and from the side menu select Security Settings. 2. From the Network Authentication drop-down menu, select WPA-PSK. By default, Data Encryption will be set to TKIP+AES (see Figure 3-6). 3. Enter the preshared key passphrase (Network Key). 4. Wireless Client Security Separation is disabled by default. If enabled, associated wireless clients will not be able to communicate with each other. (This feature is intended for hotspots and other public access situations). 5. Click Apply to save your settings. Configuring WPA2-PSK Not all wireless adapters support WPA2. Furthermore, client software is required on the client. Make sure your client card supports WPA2. Consult the product document for your wireless adapter and WPA2 client software for instructions on configuring WPA2 settings. Figure 3-7 WPA2-PSK security settings To configure WPA2-PSK: 1. From the Configuration menu select Security and from the side menu select Security Settings. Wireless Security Settings v1.0, September 2008 3-13