Netgear WN802Tv2 Reference Manual - Page 74
Configuration, Wireless Bridge., Enable Wireless Bridging and Repeating, Repeater without Wireless Client Association, Network Authentication
![]() |
UPC - 606449058505
View all Netgear WN802Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
NETGEAR Wireless-N Access Point WN802T v2 Reference Manual To configure the WN802T v2 in wireless repeater mode: 1. Open a web browser and log in to the WN802T v2 using the addressing scheme you have set up. Figure 5-4 Repeater without wireless association 2. Under the Configuration tab on the main menu, click Wireless Bridge. The Bridging and Repeating screen displays showing the default settings for the wireless access point (see Figure 5-4). 3. Check the Enable Wireless Bridging and Repeating checkbox to enable wireless bridging and repeating. 4. Select the Repeater without Wireless Client Association radio button to enable this mode. 5. Down the left of the screen select the profile you want to add/edit, and click Edit. 6. The Edit Security Profile screen displays (see Figure 5-2) in earlier section. 7. Enter a profile name or leave the default. 8. Enter the MAC (physical) address of the other bridge mode wireless access point in the Remote MAC Address field. 9. Under Authentication Settings select a Network Authentication type (one of the supported types -WEP, WPA-PSK, or WPA2-PSK should be used to protect the communication). 5-6 Advanced Wireless Bridging v1.0, September 2008
![](/manual_guide/products/netgear-wn802tv2-reference-manual-43b7963/74.png)