Netgear WN802Tv2 Reference Manual - Page 33
Logging in to the NETGEAR Wireless-N Access Point - not assigning ip
UPC - 606449058505
View all Netgear WN802Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
NETGEAR Wireless-N Access Point WN802T v2 Reference Manual Logging in to the NETGEAR Wireless-N Access Point The WN802T v2 is set, by default, with the IP address of 192.168.0.233 with DHCP disabled. Note: If logging in using the default IP address, the computer you are using to connect to the WN802T v2 should be configured with an IP address that starts with 192.168.0.x and a subnet mask of 255.255.255.0. If DHCP is enabled, you can connect to the WN802T v2 after the DHCP server on your network assigns it a new IP address: Figure 2-7 Enable DHCP client Reserve an IP address (based on the WN802T v2's MAC address) on the DHCP server. That way, if your router is deployed across several segments, you can configure the wireless access point with a static IP address which you can always use to log in to make future configuration changes. To log in using the default IP address: 1. Open a Web browser such as Mozilla Firefox or Internet Explorer. Installation and Configuration v1.0, September 2008 2-13