Netgear WN802Tv2 Reference Manual - Page 45
Configuring WPA and WPA2 with RADIUS
UPC - 606449058505
View all Netgear WN802Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
NETGEAR Wireless-N Access Point WN802T v2 Reference Manual Configuring WPA and WPA2 with RADIUS Not all wireless adapters support WPA and WPA2. Client software is required on the client: • Vista, Windows XP and Windows2000 with Service Pack 3 or later, do include the client software that supports WPA/WPA2. The wireless adapter hardware and driver must also support WPA/WPA2. • Service Pack 3 does not include the client soft ware that supports WPA2. Make sure your client card supports WPA2. The wireless adapter hardware and driver must also support WPA2. Consult the product documentation for your wireless adapter; WPA client software for instructions on configuring WPA settings; and WPA2 client software for instructions on configuring WPA2 settings. Figure 3-5 WPA and WPA2 with RADIUS security settings To configure WPA and WPA2 with RADIUS: 1. Under the Configuration tab, select Security on the main menu, select Advanced from the side menu, and then select RADIUS Server Settings. The RADIUS Server Settings screen displays. 2. Enter the RADIUS server settings as shown in "Configuring the RADIUS Server Settings" on page 4-13. 3. Click Apply to save your RADIUS server settings. Wireless Security Settings v1.0, September 2008 3-11