Netgear WN802Tv2 Reference Manual - Page 50
Select Access Control Database, Turn Access Control
UPC - 606449058505
View all Netgear WN802Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
NETGEAR Wireless-N Access Point WN802T v2 Reference Manual Figure 3-9 Access control list 3. Check the Turn Access Control On checkbox to enable the access control feature. 4. Select the desired access control database from the Select Access Control Database dropdown menu.The options are: • Local MAC Address Database - The access point will use the local MAC address table for access control. This is the default. • Remote MAC Address Database - The access point will use the MAC address table located on the external RADIUS server on the LAN for access control. If you select this database, you must configure the RADIUS server settings first (see "Configuring the RADIUS Server Settings" on page 4-13) 5. The Trusted Wireless Stations list shows any wireless stations you have entered. If you have not entered any wireless stations this list will be empty. To delete an existing entry, select it and then click Delete. 6. Click Refresh to refresh the Available Wireless Stations list (wireless stations found in your area that are associated). 7. Select the station you wish to add to the Trusted Wireless Stations list from the list of Available Wireless Stations and click Move. Do this for each station you wish to add. 8. If the station you want is not in the Available Wireless Stations list, enter the MAC address of the station manually in the Trusted Wireless Stations list. (You can usually find the MAC address printed on the bottom of the wireless adapter.) 3-16 v1.0, September 2008 Wireless Security Settings