Netgear WN802Tv2 Reference Manual - Page 57
Rebooting the NETGEAR Wireless-N Access Point, Restore Settings, Browse - reset button
UPC - 606449058505
View all Netgear WN802Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
NETGEAR Wireless-N Access Point WN802T v2 Reference Manual The current settings are saved to a file under the default name Config. To restore settings from a backup file: 1. In Step 1 of the previous section, click Restore Settings on the side menu.. Figure 4-4 Restore saved configuration settings 2. Click Browse at the Restore Saved Settings from a File box. Locate and select the previously saved backup file (by default, Config). 3. Click Apply. The wireless access point is restored to its previous settings and restarts. This takes about one minute. Warning: Do not try to go online, turn off the access point, shut down the computer or do anything else to the access point until it finishes restarting. When the PWR light turns green (access point has rebooted), wait a few more seconds before doing anything with the access point. Rebooting the NETGEAR Wireless-N Access Point You can reboot the wireless access point from the browser interface or by using the Reset button on the rear panel (see Figure 1-2 on page 1-5). Management 4-5 v1.0, September 2008