Netgear WNDA3100v2 WNDA3100v2 User Manual - Page 34
Creating a Profile, Default, Profile
View all Netgear WNDA3100v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100v2 User Manual - Write down the generated PIN. Figure 2-7 - On the access point or router that you have selected, log in to the router or access point, then follow the prompts to enter the adapter's PIN. The router will connect to the adapter. Note: The adapter security is set to WPA-PSK [TKIP]. Some WPS routers support WPA2-PSK [AES], with the same SSID and passphrase. You can change the adapter to WPA2-PSK [AES] using the Security setting in the Settings screen. 4. You can use the Status Bar to verify your network connection. For more information, see "Smart Wizard Status Bar" on page 1-11. Creating a Profile The WNDA3100v2 Smart Wizard uses profiles to store all the settings for a particular wireless network. There are three special profile names: Default, Profile, and New Profile. • Default.Your wireless-N USB adapter connects to any network. It automatically tries to connect to the first wireless network without security that it finds. • Profile. If you save a profile but do not type a name in the Profiles field, the name Profile is used to save your settings. If you do this more than once, you are asked if you want to replace the previous settings stored in Profile. 2-8 v1.0, June 2009