Olympus DM-2 DM-4 Detailed Instructions (English) - Page 112

Connecting to your PC Disconnecting from your PC Windows 1 Click [ ] on the task bar located at the lower-right corner of the screen. Click [Safely remove USB Mass Storage Device]. • The drive letter will differ depending on the PC being used. 2 Confirm that the recorder LED indicator light is gone before disconnecting the USB cable. • The LED indicator light will light up (orange) in case of charging, however you can still disconnect the USB cable in such condition. Notes • NEVER disconnect the USB cable while the 4 2 Confirm that the recorder LED indicator light is gone before disconnecting the USB cable. LED indicator light is flashing. If you do, the data will be destroyed. • When the recorder is connected to a PC, the power will be supplied from the USB • The LED indicator light will light up (orange) in case of charging, however you can still disconnect the USB cable cable. • Refer to the user's manual for your PC regarding the USB port on your PC. in such condition. • Be sure that you connect the USB cable either directly to the USB port on your PC. • Be sure to push the cable connector all the Macintosh way in. Otherwise, the recorder may not operate properly. 1 Move the drive icon for this • Cancel Hold mode. recorder that is appear on the desktop to the garbage bin by Drag & Drop it. Connecting to your PC EN 112