Olympus DM-2 DM-4 Detailed Instructions (English) - Page 28

Setting time and date [Time & Date] Setting time and date [Time & Date] If you set the time and date beforehand, the information when the file is recorded is automatically stored for each file. Setting the time and date beforehand enables easier file management. When you use this recorder for the 1 first time after purchasing, or when you switch it on after removing the batteries for more than 15 minutes when exchanging batteries etc, the [Set Time & Date] will appear. When the "hour" is flashing, conduct the setup from Step 1. The voice control function can be used with this setting (☞ P.107) (For DM-4). 1 Press the 9 or 0 button to select the item to set. • Select the item from the "hour", "minute", "year", "month" and "day" with a flashing point. • Follow the same steps by pressing the 9 or 0 button to select the next item, and press the + or − button to set. • You can select between 12 and 24 hour display by pressing the F2 (24H) button while setting the hour and minute. Example: 10:20 P.M 10:20 PM (Initial setting) 22:20 • You can select the order of the "month", "day" and "year" by pressing the F2 (M/D/Y) button while setting them. Example: April 15, 2010 2010Y 4M 15D (Initial setting) 4M 15D 2010Y 15D 4M 2010Y 3 Press the `OK button to complete the setting. • The clock will start from the set date and time. Press the `OK button according to the time signal. 2 Press the + or − button to set. EN 28 Notes • If you press the `OK button during the setup operation, the recorder will save the items that were set to that point. • After setup, a message will sound saying that if the guidance is not required, select [Off], and the display goes into [Voice Guide] (☞ P.85) setup. If you don't want the guidance feature, select [Off].