Onkyo TX-DS838 Owner Manual - Page 30

Listening to your favorite source 02,TMC"JelCl *5* Mend *5* ino t Se_ -.ior Es, Sec Selecuor SUrr d Screer Setup 0 Sys -ems Se up A 0 Sys7_em Se :- up S 13,1•71."`JrC, ** Sele,_or ** - C A TAP H - -;' Mop . . = OFF Tdout Mode = ANAL,OC Sdrrouod Mode- OFF ( STEs_i, re MN PP PP RE oawmc-src, * "no , - Solec,_or * IDEO-1 O 0 ======= 00 0 ? = ct -Jre Pr' und PP PHONES 0 On-screen display operation First, select the desired speakers by pressing a speaker button on either the remote control or the main unit. 1. Press the ENTER button on the remote control to display the Menu screen. 2. Move the cursor to Input Selector and press the ► cursor button on the remote control to display the Input Selector screen. 3. Press the -4 or IP- cursor button to display the Input Selector screen. 4. Press the • or • cursor button to select Picture and/or Sound, and then press the -4 or II. cursor button to select the desired input source. Picture Specifies the input source of the picture. Sound Specifies the input source of the sound. When you press the .4 or ► cursor button while cursors are on both Picture and Sound, you can change both parameters at the same time. However, if any setting other than VIDEO-1 through -4 is selected for the Sound parameter, the Picture setting remains unchanged and only the Sound changes. TAPE-2 Moni. Switches on and off the sound from the component connected to the TAPE-2 connectors. Keep this parameter set to OFF when TAPE-2 is not being used. Input Mode Specifies whether the signal from the component connected to one of the DIGITAL INPUT connectors will be digital or analog. (Refer to page 29 for more details.) Surround Mode Specifies the Surround mode. 5. Move the cursor over es. and press the ENTER button. 6. Follow the operating instructions for the selected unit to start playback. If TUNER is selected as the Sound input source, refer to Tuning in a radio station on page 31 for more details. Headphones Headphones with a standard stereo jack can be inserted into the PHONES jack. When the headphones plug is inserted into the PHONES jack, speakers A and B are turned off and the Surround mode automatically switches to STEREO. 30