Onkyo TX-RZ50 9.2-Channel THX Certified AV Receiver Instruction Manual - Engli - Page 134
Distance, Level Calibration, Surr Back Right Default Value: 7.0 ft/2.10 m
View all Onkyo TX-RZ50 9.2-Channel THX Certified AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
2. Speaker 3. Distance Set the distance from each speaker to the listening position. Front Left (Default Value: 12.0 ft/3.60 m) Center (Default Value: 12.0 ft/3.60 m) Front Right (Default Value: 12.0 ft/3.60 m) Height 1 Left (Default Value: 9.0 ft/2.70 m) Height 1 Right (Default Value: 9.0 ft/2.70 m) Height 2 Left (Default Value: 9.0 ft/2.70 m) Height 2 Right (Default Value: 9.0 ft/2.70 m) Surround Right (Default Value: 7.0 ft/2.10 m) Surr Back Right (Default Value: 7.0 ft/2.10 m) Surr Back Left (Default Value: 7.0 ft/2.10 m) Surround Left (Default Value: 7.0 ft/2.10 m) Subwoofer (Default Value: 12.0 ft/3.60 m) • Default values vary depending on the regions. • The unit of distance can be changed by pressing the MODE button on the remote controller. When using the unit "feet", the setting is available in increments of 0.1 ft from 0.1 ft to 30.0 ft. When using the unit "meter", the setting is available in increments of 0.03 m from 0.03 m to 9.00 m. • When measurements are made using Dirac Live ( →p161, p165), units are displayed as "msec" and the value cannot be changed. (Height 1 Left, Height 1 Right, Height 2 Left, Height 2 Right, Surr Back Right, Surr Back Left): • Depending on the use of the ZONE speakers, it may not be possible to select this setting. Setup 4. Level Calibration Adjust the volume level of each speaker. Front Left (Default Value: 0.0 dB) Center (Default Value: 0.0 dB) Front Right (Default Value: 0.0 dB) Height 1 Left (Default Value: 0.0 dB) Height 1 Right (Default Value: 0.0 dB) Height 2 Left (Default Value: 0.0 dB) Height 2 Right (Default Value: 0.0 dB) Surround Right (Default Value: 0.0 dB) Surr Back Right (Default Value: 0.0 dB) Surr Back Left (Default Value: 0.0 dB) Surround Left (Default Value: 0.0 dB) Subwoofer (Default Value: 0.0 dB) Select a value between "-12.0 dB" and "+12.0 dB" ("-15.0 dB" and "+12.0 dB" for Subwoofer) (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. (Height 1 Left, Height 1 Right, Height 2 Left, Height 2 Right, Surr Back Right, Surr Back Left): • Depending on the use of the ZONE speakers, it may not be possible to select this setting. 134