Onkyo TX-RZ50 9.2-Channel THX Certified AV Receiver Instruction Manual - Engli - Page 159

Network Connection 1. A confirmation screen asking you whether to agree to the privacy statement is displayed during network setting. If you agree, select "Accept" and press ENTER. 2. Select the type of connection to the network. To use the Chromecast built-in function to connect, select "Yes" and press ENTER. The Google Home app is required to use the Chromecast built-in function. Download the Google Home app from Google Play or the App Store to your smart phone or tablet. • Google Home app can be used on the following operating systems. (As of february 2021) Android™: Android 6.0 or later. iOS: iOS 12.0 or later. Compatible with iPhone®, iPad®, and iPod touch®. 1 2 8J'J If you select "No", you can connect using either wired LAN or Wi-Fi. "Wired": Use a wired LAN to connect to a network. "Wireless": Wi-Fi connection using an access point such as a wireless LAN router. • There are two methods for Wi-Fi connection. "Scan Networks": Search for an access point from this unit. Find out the SSID of the access point beforehand. "Use iOS Device (iOS7 or later)": Share the Wi-Fi settings of your iOS device with this unit. • If you select "Scan Networks", there are another two types of connection methods. Check the following. "Enter Password": Enter the password (or key) of the access point to connect. "Push Button": If the access point is equipped with an automatic setting button, you can connect without entering the password. • If the SSID of the access point is not displayed, select "Other..." with the cursor on the SSID list screen, press ENTER, and then follow the onscreen instructions. Setup Keyboard Input To switch between upper and lower cases, select "A/a" on the screen, and press ENTER on the remote controller. To select whether to mask the password with "" or display it in plain text, press MEMORY on the remote controller. Pressing CLEAR on the remote controller will delete all the input characters. 1. Speaker Setup 1. Select the connected speaker configuration and press ENTER. Note that the image on the screen changes each time you select the number of channels in "Speaker Channels". 1 Speaker Setup 2 Speaker Channels 7.1.2 ch < > 3 Subwoofer Height 1 Speaker Yes Top Middle 4 Height 2 Speaker --- 5 Zone Speaker No 6 Zone 2 Preout Zone 2 7 Bi-Amp No Speaker Impedance 6ohms or above 8 Select how many speakers you have. Next 1 Select to suit the number of speaker channels connected. 2 Set whether a subwoofer is connected or not. 3 Set the speaker type if height speakers are connected to the HEIGHT 1 terminals. 4 Set the speaker type if height speakers are connected to the HEIGHT 2 terminals. 5 Set the connection of speakers to Zone 2/Zone 3 speaker terminals. 6 Set an output destination of the audio output from ZONE 2 PRE/LINE OUT/ ZONE B LINE OUT jack. 7 Set whether the front speakers are bi-amp connected. 8 Set the impedance of the connected speakers. 2. The speaker combination selected in step 1 is displayed. "Yes" is displayed for the selected speakers. If the setting is correct, press ENTER. 159