Onkyo TX-RZ50 9.2-Channel THX Certified AV Receiver Instruction Manual - Engli - Page 135
Dolby Enabled Speaker, Equalizer Settings, AccuReflex Default Value: Off
View all Onkyo TX-RZ50 9.2-Channel THX Certified AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
2. Speaker 5. Dolby Enabled Speaker Change the settings of Dolby Enabled Speakers. • This setting can be selected when "Configuration" - "Height 1 Speaker" / "Height 2 Speaker" is set to "Dolby Speaker". Distance from the ceiling (Default Value: 6.0 ft/1.80 m) Set the distance between the Dolby Enabled Speaker and the ceiling. Select between "0.1 ft"/"0.03 m" and "15.0 ft"/"4.50 m" ("0.1 ft"/"0.03 m" units). • The unit of distance (ft/m) is displayed using the unit selected for the "Distance" setting. AccuReflex (Default Value: Off) You can enhance the reflection effect of Dolby Enabled Speakers from the ceiling. • The function is not effective if the listening mode is Pure Audio or Direct. • The function is not effective if "Dirac Live" ( →p93) has been enabled. Off When this function is not used On When this function is used Setup 6. Equalizer Settings You can adjust the output volume of the range for each connected speaker. Adjust the volume of different sound ranges for each speaker. You can set three different equalizers in Preset 1 to 3. The number of frequencies that can be selected for each speaker is up to five bands for the Subwoofer and nine bands for the other speakers. Front (Default Value: 0.0dB) Center (Default Value: 0.0dB) Height 1 (Default Value: 0.0dB) Height 2 (Default Value: 0.0dB) Surround (Default Value: 0.0dB) Surround Back (Default Value: 0.0dB) Subwoofer (Default Value: 0.0dB) After selecting the speaker frequency from between "25 Hz" and "16 kHz" ("25 Hz" and "160 Hz" for Subwoofer) with the cursors / , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / . • Depending on the input source or listening mode setting, the desired effect may not be achieved. (Height 1 Left, Height 1 Right, Height 2 Left, Height 2 Right, Surround Back): • Depending on the use of the ZONE speakers, it may not be possible to select this setting. (Subwoofer): • This cannot be selected if "Configuration" - "Subwoofer" is set to "No". 135