Onkyo TX-SV919 Owner Manual - Page 27

Listening to yourfavorite source INPUT SELECTOR MASTER VOLUME a a • 0 MI. O= • • SURROUND MODE PARAMETER CONTROLLER PARAMETER SELECTOR EB, 0 0 0 0 0 0 C C 0 0 0 - 1I0I 00 = CI I=1 00 0 0 LD ENTER/ESCAPE Key CURSOR Keys Operating with the main unit 1. Press the POWER button to turn on the power. POWER 0 STAND-BY ' RECEIVED 2. Press the PUSH OPEN button to open the door. PUSH OPEN 0 3. Press the A or B speaker selector button. SPEAKERS A A or B indicator light up. 4. Press the desired Input Selector button. VIDEO-fi TAPE I E-2 MTOA T0R FM PMONO CC • Confirm that the TAPE-2 MONITOR indicator is off when a source other than the TAPE-2 MONITOR has been selected. Also check the audio muting is off. • Please refer to the operations from page 42 onward in order to play ♦ht e selected source with Surround. • When External Decoder (with a 6 channel Audio input) is chosen with the Parameter Selector, the sound from the decoder is played. 5. Start the selected input source playing. • Follow the operating instruction of that unit. • If FM or AM is selected, please refer to the section "Using the tuner. 6. Adjust the volume to appropriate level using the MASTER VOLUME knob. • • DUB 0 Al8dB • When the Volume knob is turned, the volume level is shown on the display for 3 seconds. 7. Select the tone control using the 1 or ► button of the PARAMETER SELECTOR to select the parameter you want to adjust. 8. Adjust the tone control to appropriate level using or IP. button of the PARAMETER CONTROLLER to set the desired value. NOTES: • TREBLE and BASS are effective for the Left, Right and CENTER of the speakers. The best effect from Dolby Pro Logic Surround can be obtained when equal setting are used for the sound from the Left/Right speakers and the sound from the Center speaker for the middle and treble ranges. The Surround mode can not be used when THX CINEMA is selected. • When High Pass Filter is turned on, there are very little Bass effects. 27