Onkyo TX-SV919 Owner Manual - Page 59

Specifications AMPLIFIER SECTION Power output: Stereo mode! (BY-PASS mode, H.P.F.: OFF) LEFT and RIGHT channels 110 watts per channel min RMS. at 8 ohms, both channels driven, from 20Hz to 20,000Hz, with no more than 0.03 % total narmonic distortion. Surround mode LEFT, RIGHT and CENTER channels 100 watts min. RMS. at 8 ohms 1,000Hz, with no more than 0.08% total harmonic distortion. LEFT SURROUND and RIGHT SURROUND Channels 50 watts per channel min. RMS. at 8 ohms 1,000Hz with no more than 0.08% total harmonic distortion. IM distortion: 0.03% at rated power (LEFT and RIGHT) Damping factor: 70 at 8 ohms (LEFT and RIGHT) Input sensitivity/impedance: Phono: 2.5mV/50 kohms Line (CD, TAPE 1 - 2, VIDEO 1 - 6): 200mV/50 kohms Main in (LEFT, RIGHT, CENTER): 1V150 kohms (100W output) Main in (LEFT SURROUND, RIGHT SURROUND): 0.7V/50 kohms (50W output) EXTERNAL DECODER INPUT (_EFT. RIGHT. CENTER, LEFT SURROUND, RIGHT SURROUND, SUBWOOFER): 200mV/50 kohms Output level/impedance: Rec out (TAPE 1 - 2). 200mV/2.2 kohms Out (VIDEO 1 - 3): 200mV/2.2 kohms Pre out (LEFT. CENTER, RIGHT, LEFT SURROUND, RIGHT SURROUND, SUBWOOFER): 1V/470 ohms Pre out (MULTI SOURCE): 1V/470 ohms Phono overload: 120mV RMS. at 1,000 Hz, 0.5 % THD. Frequency response: 20 to 30,000 Hz, +/-0.5 dB (Tone control: off) RIAA deviation: 20 to 20,000 Hz, +/-0.8 dB Tone control: BASS: +/-10 dB at 100 Hz (Front LJR, center) TREBLE: +/ 10 dB at 10,000 Hz Signal-to-Noise ratio: PHONO: 80 dB (IHF A, 5mV input) (Surround mode: BY PASS) CD/TAPE: 100 dB (IHF A) Muting: -.OdB VIDEO SECTION (NTSC TV system) Television format: NTSC Input sensitivity/impedance IN (VIDEO 1 - 6) VIDEO (Composite): 1Vp-p/75 ohms IN (VIDEO 1 - 6) S-VIDEO (Y signal): 1Vp-p/75 ohms IN (VIDEO 1 - 6) S-VIDEO (C signal): 0.28Vp-p/75 ohms Output level/impedance OUT (VIDEO 1 -. 3 MONITOR OUT 1 2) VIDEO (Composite): 1Vp-p/75 ohms OUT (VIDEO 1 - 3, MONITOR OUT 1) S-VIDEO (Y signal): 1Vp-p/75 ohms OUT (VIDEO 1 - 3, MONITOR OUT 1) S-VIDEO (C signal): 0.28Vp-p/75 ohms TUNER SECTION FM: Tuning range: Usable sensitivity: 50 dB quieting sensitivity: Capture ratio: Image rejection ratio: IF rejection ratio: Signal-to-Noise ratio: Alternate channel Attenuation: AM suppression ratio: Harmonic distortion: Frequency response: Stereo separation: Muting level: 87.50 - 108.00 MHz (50 kHz steps) Mono: 11.2 dBf, 1.0 uV (75 ohms) Stereo: 17.2 dBf, 2.0 µV (75 ohms) Mono: 17.2 dBf, 2.0 uV (75 ohms) Stereo: 37.2 dBf, 20 uV (75 ohms) 1.5 dB 85 dB 90 dB Mono: 76 dB Stereo: 70 dB 55 dB 50 dB Mcno: 0.1% Stereo: 0.2% 30- 15,000 Hz- 1.0 dB 45 dB at lkHz 30 dB at 100 - 10,000 Hz 17.2 dBf AM: Tuning: USA and Canadian models 530 - 1710 kHz (10 kHz steps) Other area models 522 - 1611 kHz (9 kHz steps) Usable sensitivity: 30 µV Image rejection ratio: 40 dB IF rejection ratio: 40 dB Signal-to-Noise ratio: 40 dB Harmonic distortion: 0.7% GENERAL Power supply: USA and Canadian models AC120V. 60 Hz Other area models AC 230V.50 Hz Dimensions (W x H x D): 455 x 190 x 425 mm 17-15/16 " x 7-7/16" x 16-11/16" Weight: 22 kg., 48.5 lbs. REMOTE CONTROL 267M, 268S Transmitter: Infrared Signal range: Approx, 5 meters (16ft.") Power supply: RC267M four "AAA" batteries (1.5V x 4) RC268S two "AA" batteries (1.5V x 2) Specifications and features are subject to change without notice. 59