Panasonic 50LCX63 Multi-media Display - Page 35
Channel and Program Tuning, Direct Tuning Method, Channel Banner Display
View all Panasonic 50LCX63 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Device display operation Channel and Program Tuning Channel and Program tuning in digital television differs from conventional television. With DTV, many programs can exist within a single 6 MHz channel. These channels behave as sub-channels within a single channel. When tuning to a digital channel, the Device Display will also tune to a program and will indicate the channel and program in the on-screen Channel Banner display. In order to select channels properly, Auto Scan must be performed (refer to pages 30-31). Direct Tuning Method Follow the procedure below to directly enter the channel number using the Remote Control number keys. Select analog channel 1 1 2 3 4 5 6 7 8 9 0 Press the number keys on the Remote Control to enter the Channel number. Press OK. The following is an example of tuning to channel 15. 2 CH VOL OK VOL CH Direct Tuning Example Step Action 1 Press 1 2 Press 5 3 Press OK Channel Banner Display 1 15 15 Basic Operation Select digital channel 1 1 2 3 4 5 6 7 8 9 0 If tuning a digital channel and your channel contains more than one program, press PROG and enter the program (1, 2, 3 etc.) using the number keys. Press OK. The following is an example of tuning to channel 15-1. 2 PROG 3 1 2 3 4 5 6 7 8 9 0 Direct Tuning Example Step Action 1 Press 1 2 Press 5 3 Press - 4 Press 1 5 Press OK Channel Banner Display 1 15 15- 15-1 15-1 4 CH VOL OK VOL CH 35