Panasonic AG-HMR10 Operating Instructions - Page 23
Power sources, Charging
View all Panasonic AG-HMR10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Preparation Description of parts Power sources Charging The battery does not come ready charged when the portable recorder is purchased. Charge the battery before use. It is recommended that you keep one extra battery as a spare. 1 Connect the power cable to the AC adapter. Disconnect the DC cable. (Battery cannot be charged if DC cable is connected.) ■ Charging lamp On: Charging in progress Off: Charging complete Flashing: See below Insert until fully in place. 2 Insert the battery. Charging lamp [CHARGE] ■ If charging lamp is flashing Check that there is no dirt, dust, or other substances attached to the connectors on the battery or AC adapter, and ensure that the adapter has been connected correctly. • If there is dirt or dust on the connectors, disconnect the power plug from the socket before cleaning. • If the charging lamp continues to flash, there may be a fault with the battery or the AC adapter. Please consult with the place of purchase. Align the battery with the mark and insert fully. Depending on the country and region, the actual configuration of the power cable, plug, and power outlet may differ from those shown in these operating instructions. (Continued on the next page) 23