Panasonic AG-HMR10 Operating Instructions - Page 47
Turning off the LCD monitor screen (LCD OFF)
View all Panasonic AG-HMR10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Recording Turning off the LCD monitor screen (LCD OFF) The LCD monitor screen can be turned off. 1 While pressing the [SHIFT/EXEC] button, press the [USER] button. • Press the same buttons again to cancel the setting. • The setting is canceled when the power is turned off. • When the LCD monitor screen is off, in addition to the buttons for turning the screen back on, the [POWER] button and [REC/ PAUSE] button can also be operated. Adjusting the recording level of the input audio (MIC LEV) The recording level of the input audio from the microphone connector can be adjusted. 1 While pressing the [SHIFT/EXEC] button, press the [AUDIO MON/ADV + ] or [AUDIO MON/ADV - ] button. AUDIO MON/ADV + : Raises the input level. AUDIO MON/ADV - : Lowers the input level. While adjusting, refer to the level display for microphone input adjustment on the LCD monitor screen. • Check the recording volume level prior to shooting. • The recording level is set approximately 8 dB higher than Panasonic broadcasting camerarecorders (AJ series products). • When an external microphone is connected to the microphone terminal, the input audio switches automatically to the external microphone. • When an external microphone is not connected to the microphone terminal, the input audio is selected as follows. CAM mode: Built-in microphone of the AGHCK10G camera head (optional) SDI mode: HD-SDI embedded audio signal Color bar By selecting [INT SG] → [ON] in the [RECORDING SETUP] setup menu, you can display a color bar during REC mode, which is useful when adjusting the image quality of a television or external monitor. • While the color bar is displayed, a test tone of 1 kHz∗ will be output from the headphone terminal and built-in speaker. (However, in CAM mode there is no output from the built-in speaker.) ∗ When [SYSTEM FREQ] is set to [50Hz], a test tone of 997 Hz is output. • The color bar can be recorded by pressing the [REC/PAUSE] button. • The function is not canceled even when the power is turned off. To cancel the color bar display, select [INT SG] → [OFF] in the [RECORDING SETUP] setup menu. To output the color bar from the SDI OUT terminal, select [SDI EE SEL] → [NORMAL] in the setup menu [AV OUT SETUP]. Time stamp function The date and time of recording can be recorded on the video images. Select [TIME STAMP] → [ON] in the [RECORDING SETUP] setup menu. When [TIME STAMP] is [ON], R is displayed on the LCD monitor. • R itself is not recorded on the video images. • The size and position of the date and time characters recorded on the image will vary depending on the recording format. • The size and position of the date and time characters recorded on the image in external output displays may vary from the displays on the LCD monitor. • The recorded date and time display will follow the [DATE/TIME] setting in [DISPLAY SETUP]. When [DATE/TIME] is set to [OFF], the date and time of recording are not recorded even if [TIME STAMP] is set to [ON]. • To avoid date and time displays overlapping when clips with time stamps recorded are played with this portable recorder, select [DATE/TIME] → [OFF] in the [DISPLAY SETUP] setup menu. 47