Panasonic AG-HMR10 Operating Instructions - Page 75
In PB mode: When the [AUDIO MON/ADV] button is - sdi input error
View all Panasonic AG-HMR10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
• The remaining battery capacity display is a guideline and may change according to usage conditions. • The remaining battery capacity display will momentarily disappear when switching between modes or changing the LCD brightness, because the capacity is recalculated at these times. • Not displayed when using the AC adapter. • You can switch between displaying and not displaying this information by selecting [CARD & BATTERY] → [ON] or [OFF] in the [DISPLAY SETUP] setup menu. 28 Repeat playback display (In PB mode: Page 61) Displayed when [REPEAT PLAY] → [ON] in the [PLAY SETUP] setup menu is selected. 29 Operation status display (In REC mode) REC: Recording PAUSE (green): Recording standby PAUSE (red): Recording paused • Displayed when an error occurs in the input signal during recording. • When the input signal returns to normal, the recording restarts. • When the [REC/PAUSE] button is pressed, the display changes to green. CHK: REC CHECK in progress (In PB mode) : Playback : Playback paused INDEX [ ]:Playback paused at index position ( ): Frame-by-frame playback (Frame-by-frame reverse playback) ( ): Next clip (Previous clip) ( ): Fast forward playback (Approximately 5 times the speed∗)(Rewind playback (Approximately 5 times the speed∗)) ∗ Approximately 6 times normal speed when the [PB FORMAT] is set to 720/24P. ( ): Fast forward playback (Approximately 15 times the speed∗) (Rewind playback (Approximately 15 times the speed∗)) ∗ Approximately 20 times normal speed when the [PB FORMAT] is set to 720/24P. ( ): Paused in final scene (paused in initial scene) 30 Input signal display SDI: Displayed when in SDI mode. • The display flashes when recording cannot be performed, such as when the input signal and recording format are different. CAM: Displayed when in CAM mode. • Flashes if the camera head has an abnormality, such as a malfunction or broken cable. INT: Displayed when [INT SG] → [ON] in the [RECORDING SETUP] setup menu is selected. (Page 84) • You can switch between displaying and not displaying this information by selecting [OTHER DISPLAY] → [ON] or [OFF] in the [DISPLAY SETUP] setup menu. 31 Recording function display P-: Displayed when PRE REC is set. (In CAM mode: Page 49) A-: Displayed when [AUTO REC] in the [RECORDING SETUP] setup menu is set to something other than [OFF]. (In SDI mode: Page 84) 32 Audio output adjustment level display (Page 68)/Microphone input adjustment level display (Page 47) When the [AUDIO MON/ADV] button is pressed, the sound volume output from the built-in speaker and headphone jack is displayed. During input audio level adjustment, "I.MIC" or "E.MIC" is displayed instead of "VOLUME". 33 Safety zone The range is displayed in accordance with the [SAFETY ZONE] (Page 88) setting in [DISPLAY SETUP]. When [4:3] is selected: This displays the positions for 4:3 cropping. When [90%] is selected: This indicates the range (90 %) that can be displayed by an ordinary home-use television. • When "EXPANDED" is displayed because the focus assist function of CAM mode is being used, the safety zone is not displayed on the LCD monitor screen. (For using focus assist, see page 46.) Displays 75