Panasonic AG-HMR10 Operating Instructions - Page 76
Main warning displays
View all Panasonic AG-HMR10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Screen displays (continued) Main warning displays The main warning displays that appear on the LCD monitor screen are listed below. If a warning display is not listed here, check it carefully when it is displayed. ■ C CANNOT BE USED DUE TO INCOMPATIBLE DATA. Cannot be used because the data standard is different. • The format of the SD Memory Card does not match the [SYSTEM FREQ] setting. CANNOT SET PRE-REC, CARD CAPACITY TOO LOW. PRE REC cannot be set because the remaining card capacity is too low. CARD DOOR OPENED. The card door is open. CANNOT DELETE. Deletion is not possible. CANNOT DELETE WITH THIS BUTTON Deletion is not possible with this button. CANNOT OPERATE. FAN MOTOR IS STOP. PLEASE TURN OFF. • Displayed when an abnormality is detected in the cooling fan of the camera head. CANNOT OPERATE. TEMPERATURE IS HIGH. PLEASE TURN OFF AND WAIT A WHILE. • Displayed when an abnormally high temperature is detected in the camera head. CANNOT PLAY. Playback is not possible. CANNOT PLAY WITH THIS BUTTON Playback is not possible. CANNOT RECORD PH MODE AND HA MODE INTO THIS CARD. Recording on this card is not possible in PH mode or HA mode. CANNOT RECORD. THE NUMBER OF CLIPS HAS EXCEEDED THE MAXIMUM LIMIT. The maximum number of clips has been reached and no further clips can be recorded. CANNOT SET THE NUMBER OF INDEXES HAS EXCEEDED THE MAXIMUM LIMIT. No further indexes can be set because the number of indexes will exceed the maximum limit. CARD ERROR. PLEASE REFORMAT. Formatting has failed. The card needs to be reformatted. CARD FULL. The card is full. CHECK CARD. Check the card. CHECK USB CABLE. Connect a PC. CONTROL DATA ERROR HAS BEEN DETECTED. An error has been detected in the control information. ■D DISCONNECT USB CABLE. When switching from one mode to another, disconnect the USB cable. ■ I INCOMPATIBLE CARD. PLEASE CHECK CARD. Recording may not be successful with this card. Check the card. INVALID KEY INPUT • Displayed when a button is operated during key lock. (Page 46) ■ N NO CARD No card is inserted. NOW ACCESSING. PLEASE DO NOT REMOVE CARD. Card is currently being accessed. Do not remove the card. 76