Panasonic AG-HMR10 Operating Instructions - Page 39
Setting the time code, Specifying the time code (TC PRESET), TC PRESET
View all Panasonic AG-HMR10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Setting the time code Setting the time code In the [TC/UB SETUP] setup menu, set the following time code related items. (Page 86) • TC MODE (Only when [SYSTEM FREQ] is set to [59.9Hz]) • TCG • SDI REGEN • TC PRESET 5 When the screen below appears, set the time code value. Press to select the time code value. When [SDI REGEN] is set to [ON], the [TC MODE], [TCG] and [TC PRESET] settings cannot be changed. Specifying the time code (TC PRESET) Set [TC PRESET] to record a value of your choice as the initial time code setting to be used at the start of recording. 1 Press the portable recorder's [POWER] button for 2 seconds or longer to turn on the power. 2 Press the [MENU] button. Using the setup menus (Page 29) 3 Select [TC/UB SETUP] → [TC PRESET]. Press press to move to the next digit, and then again to select the value. Hour Minute Second Frame Example: To set 10 hours, 23 minutes, 46 seconds, frame 20, select the time code value "10h23m46s20f." Press the [USER] button while setting the time code to reset the time code to zero. 6 Press the [ENTER] button when you have finished setting the time code. 7 Press to move to [YES], and then press the [ENTER] button. Recording 4 Press to move to [YES], and then press the [ENTER] button. With this portable recorder, the time code value is adjusted in accordance with the recording format and frame rate. When shooting is performed with the recording format set to 1080/24P or 720/24P, recording is performed 4 frames at a time. For this reason, if you change the recording format or frame rate, it may result in discontinuity from the last time code value of the previous recording. (Only when [SYSTEM FREQ] is set to [59.9Hz]) 39