Panasonic AJSD755 AJSD755 User Guide - Page 14
ANALOG COMPOSITE VIDEO OUT connectors
View all Panasonic AJSD755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Parts and their functions Rear panel AC IN SIGNAL GND =< AES/EBU CH1/2 IN CH1/2 OUT Y PB ANALOG VIDEO IN ON Y 75Ω OFF PB REF VIDEO IN ON PR 75Ω OFF 1 VIDEO OUT 2 (WFM) REMOTE REMOTE IN/OUT REMOTE OUT ENCODER REMOTE RS-232C PARALLEL PR 3 (SUPER) ANALOG CH1 PUSH AUDIO PUSH CH2 IN PUSH TC IN TC OUT OPTION 1 SDI IN OUT 1 ACTIVE THROUGH 2 CH1 AUDIO CH2 MON OUT L 3 (SUPER) OPTION 2 SDTI IN OUT MON R 1 2 SERVICE ONLY > ?@ A BC D < Fan This fan is used to cool down the VTR. If, for any reason, the fan stops, "E-10" will appear on the counter display. = SIGNAL GND terminal This is connected to the signal ground terminal on the component connected to this VTR in order to minimize noise. It is not a safety ground. > ANALOG COMPONENT VIDEO OUT connectors The analog component video signals are output through these connectors. ? ANALOG COMPOSITE VIDEO OUT connectors The analog composite video signals are output through these connectors. The waveform monitor (WFM) signal can be output from the VIDEO OUT 2 connector. It can be selected using setup menu No. 00 (WFM SEL). Video signals containing superimposed information can be output through the VIDEO OUT 3 connector. Whether the superimposing is to be set ON or OFF is selected using the SUPER switch W on the front panel. A PARALLEL REMOTE connector This connector is used when the VTR is to be operated by an external component. B ANALOG AUDIO OUT connectors The analog audio signals are output through these connectors. C MONITOR OUT connectors During playback, the PCM audio signals (CH1/CH2) or playback signals from the CUE track are output through these connectors. Noise may appear on the CUE signal at the instant recording is started. D SDTI input and output connectors (optional) When the SDTI board (AJ-YAC930G, optional accessory) is installed in this VTR, digital data can be input and output using the SDTI (Serial Data Transport Interface) format. IEEE1394 digital input/output connector (optional) Use of an digital video interface board (AJYAD755G, optional accessory) enables input/output interfacing of the digital signals with the IEEE1394 standard. @ RS-232C connector A personal computer or other component can be connected to this connector to operate the VTR. 14