Panasonic AJSD755 AJSD755 User Guide - Page 48

Setup menus USER menu No./Item Description 701 CH1 IN LV 702 CH2 IN LV 706 CH1 OUT LV 707 CH2 OUT LV 711 MONIL OUT LV 712 MONIR OUT LV 713 MONI OUT This selects the audio input (CH1) reference level switching. 0000 0001 0002 4dB 0dB -20dB This selects the audio input (CH2) reference level switching. 0000 0001 0002 4dB 0dB -20dB This selects the audio output (CH1) reference level switching. 0000 0001 0002 4dB 0dB -20dB This selects the audio output (CH2) reference level switching. 0000 0001 0002 4dB 0dB -20dB This selects the audio monitor output (Lch) reference level switching. 0000 0001 0002 4dB 0dB -20dB This selects the audio monitor output (Rch) reference level switching. 0000 0001 0002 4dB 0dB -20dB This selects whether or not to couple the volume level of the audio monitor output with the volume control of the headphone jack. 715 CH1 IN SEL 0000 UNITY : Volume is output at a fixed level, regardless of the position of the volume control. 0001 VAR : Audio monitor output volume is coupled to the volume control. This selects the CH1 input when USER SET has been selected by pressing the unit's AUDIO input selector button. 716 CH2 IN SEL 0000 0001 ANA : Analog input. DIGI : Digital input. This selects the CH2 input when USER SET has been selected by pressing the unit's AUDIO input selector button. 0000 0001 ANA : Analog input. DIGI : Digital input. The underlined items indicates the initial setting. No./Item Description 719 DIGI IN SEL This selects the CH1 and CH2 digital input when USER SET has been selected by pressing the unit's AUDIO input selector button. 0000 0001 AES : AES/EBU input SIF : SDI input When no optional board (AJ-YA755G) has been installed, setup menu No. 719 is not displayed. 721 This selects the monitor output. MONI CH SEL 722 REC CH1 723 REC CH2 726 0000 MANU : The output signal is as selected in MONITOR SELECT buttons. 0001 AUTO : PCM AUDIO output is selected within the -0.43 (-0.5)a to +1a speed range; CUE is automatically selected for all other tape speeds. The value for the DV/DVCAM tape is shown in parenthesis ( ). 0002 PCM : The PCM AUDIO signal is output over the -10a to +10a range. This setup menu's setting takes effect when CH1 or CH2 has been selected by the L and R MONITOR SELECT buttons on the front panel. (If CUE has been selected, the cue signal will be output at all the speeds regardless of the setup menu's setting.) This selects the input signal to be recorded on the audio CH1 track. 0000 0001 0002 CH1 : Audio input CH1 signal. CH2 : Audio input CH2 signal. CH1+2 : Mixed audio input CH1 and CH2 signal. This selects the input signal to be recorded on the audio CH2 track. 0000 0001 0002 CH1 : Audio input CH1 signal. CH2 : Audio input CH2 signal. CH1+2 : Mixed audio input CH1 and CH2 signal. This selects the input signal recorded in CUE. REC CUE 727 PB FADE 0001 CH1 : Audio CH1 input 0002 CH2 : Audio CH2 input 0003 CH1+2 : Audio CH1 and CH2 MIX signal This selects the processing method for the audio edit points (IN point, OUT point) during playback. 0000 0001 0002 AUTO : According to the status during recording. CUT : Forced CUT FADE : Forced FADE 48