Panasonic AJSD755 AJSD755 User Guide - Page 51

<V BLANK&gt, For selecting the mode for recording signals

Page 51 highlights

Setup menus USER menu No./Item Description 800 ADD LINE Sub-screen 00 REC LINE1 For selecting the mode for recording signals on additional lines. 0000 OFF : No signals are recorded on additional lines. 0001 YC422 : The 422 mode signals are recorded on 1 line. 0002 YC411 : The 411 mode signals are recorded on 1 line. 0003 Y1_B/W : Only the Y signal is recorded on 1 line directly. 0004 Y1_BPF : Only the Y signal is recorded on 1 line after it has been separated from the C signal. 0005 C1 : Only the C signal is recorded on 1 line. 0006 Y2_B/W : Only the Y signal is recorded on 2 lines directly. 0007 Y2_BPF : Only the Y signal is recorded on 2 lines after it has been separated from the C signal. 0008 C2 : Only the C signal is recorded on 2 lines. OWhen a setting from "0001 (YC422)" to "0008 (C2)" is selected and the STOP button is pressed, operation transfers to the sub-screen, and the recording line or lines can be selected. To return from the sub-screen, press the STOP button again. For selecting the additional line where the signals are to be recorded. 01 REC LINE2 0000 : 0012 0013 0014 : 0025 0026 10L : 22L 263L 273L : 284L 525L For selecting the additional line where the signals are to be recorded. 0000 : 0012 0013 0014 : 0016 : 0025 0026 10L : 22L 263L 273L : 275L : 284L 525L This menu item is not displayed when additional line mode setting "1" through "5" has been selected. The underlined items indicates the initial setting. No./Item 802 TELETEXT SEL Description For selecting the type of teletext signals to be recorded. 0000 MOJI : MOJI system 0001 NABTS : NABTS system VITC signals are often mistakenly detected as teletext signals when the NABTS system has been selected. If this happens, select MANU as the setting for setup menu No. 803 (TELETEXT DET), then select the line for teletext signals. 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78

51
No./Item
Description
802
TELETEXT
SEL
For selecting the type of teletext signals to be
recorded.
0000
MOJI
:
MOJI system
0001
NABTS
:
NABTS system
<Note>
VITC signals are often mistakenly detected as
teletext signals when the NABTS system has
been selected.
If this happens, select MANU as the setting for
setup menu No. 803 (TELETEXT DET), then
select the line for teletext signals.
Setup menus
The underlined items indicates the initial setting.
USER menu
<V BLANK>
No./Item
Description
800
ADD LINE
00
REC LINE1
Sub-screen
For selecting the mode for recording signals
on additional lines.
0000
OFF
:
No signals are recorded on
additional lines.
0001
YC422
:
The 422 mode signals are
recorded on 1 line.
0002
YC411
:
The 411 mode signals are
recorded on 1 line.
0003
Y1_B/W
:
Only the Y signal is recorded on
1 line directly.
0004
Y1_BPF
:
Only the Y signal is recorded on
1 line after it has been separated
from the C signal.
0005
C1
:
Only the C signal is recorded on
1 line.
0006
Y2_B/W
:
Only the Y signal is recorded on
2 lines directly.
0007
Y2_BPF
:
Only the Y signal is recorded on
2
lines
after
it
has
been
separated from the C signal.
0008
C2
:
Only the C signal is recorded on
2 lines.
<Note>
O
When a setting from “0001 (YC422)” to “0008
(C2)” is selected and the STOP button is
pressed, operation transfers to the sub-screen,
and the recording line or lines can be selected.
To return from the sub-screen, press the STOP
button again.
For selecting the additional line where the
signals are to be recorded.
0000
10L
:
:
0012
22L
0013
263L
0014
273L
:
:
0025
284L
0026
525L
01
REC LINE2
For selecting the additional line where the
signals are to be recorded.
0000
10L
:
:
0012
22L
0013
263L
0014
273L
:
:
0016
275L
:
:
0025
284L
0026
525L
<Note>
This menu item is not displayed when additional
line mode setting “1” through “5” has been
selected.