Panasonic AJSD755 AJSD755 User Guide - Page 46

Setup menus USER menu No./Item Description 622 SETUP Sub-screen 00 CMPST IN For setting 7.5% setup processing to be performed on input and output signals. When the STOP button is pressed, operation is transferred to the sub-screen, and the setup level is set for each output. To return from the subscreen, press the STOP button again. This selects the 7.5% setup processing for the input composite signal. 01 CMPST OUT 0000 THRU : The signal is recorded in its original form. 0001 CUT : The signal is recorded with the 7.5% setup removed. This selects the 7.5% setup processing for the output composite signal. 02 CMPNT IN 0000 THRU : The signal is output in its original form. 0001 ADD : The signal is output with the 7.5% setup added. Bear in mind the setting for sub-screen item No. 03 (CMPNT OUT) of setup menu item No. 622 (SETUP 25). This selects the 7.5% setup processing for the input component signal. 03 CMPNT OUT 0000 THRU : The signal is recorded in its original form. 0001 CUT : The signal is recorded with the 7.5% setup removed. This selects the 7.5% setup processing for the output composite, component and serial (digital) signal. 0000 THRU : The signal is output in its original form. 0001 CUT : The signal is output with the 7.5% setup removed. 0002 ADD : The signal is output with the 7.5% setup added. No./Item Description 624 CC REC For selecting whether to record the closed caption signals multiplexed on the input signals on the tape. 0000 OFF : No closed caption signal is recorded. In addition, the EE output signals are blanked. 0001 ON : When a closed caption signal is detected from the selected input signal, it can be recorded. If SDTI/1394 signals have been selected as the input signals, the closed caption signals which have been multiplexed onto the input signals will be recorded on the tape regardless of the setting. 645 WIDE SELECT This selects whether or not to record the wide-screen information on the tape. 0001 WIDE : The wide-screen information is not recorded on the tape. 0002 NORMAL : The wide-screen information is recorded on the tape. If SDTI/1394 has been selected as the input signals using the INPUT SELECT button, the wide-screen information on the input signals will be recorded regardless of this menu's setting. 660 UMID REC This selects whether or not to record the UMID information on the tape. 0000 OFF : UMID information is not recorded on the tape. In addition, EE output signals are blanked. 0001 ON : UMID information is recorded on the tape. OIf SDTI/1394 has been selected as the input signals using the INPUT SELECT button, the UMID information on the input signals will be recorded regardless of this menu's setting. OIf THRU has been selected as the setup menu item No. 106 (EE MODE SEL) setting, UMID information of the EE output signals will be blanked. The underlined items indicates the initial setting. 46