Panasonic AJSD755 AJSD755 User Guide - Page 45

Setup menus USER menu No./Item Description 600 This selects the internal reference signal. INT SG 601 OUT VSYNC 0001 BB : The black burst is generated. 0002 CB100 : 100% color bars are generated. 0003 CB75 : 75% color bars are generated. This selects whether to float the vertical sync position of the video output in order to align the video output phase with the input in the EE/record/edit modes. 602 V-MUTE SEL 0000 N-VF : Signals are not floated. 0001 VF : Signals are floated. This selects whether to mute the video output signals when a blank on the tape has been detected during playback. 603 CC (F1) BLANK 604 CC (F2) BLANK 605 0000 N-MUTE : No muting. (Freeze) 0001 LOW RF : Muting. (Set to gray.) This selects ON or OFF for the closed caption signal of the first field. 0000 BLANK : Signal is forcibly blanked. 0001 THRU : Signal is not blanked. This selects ON or OFF for the closed caption signal of the second field. 0000 BLANK : Signal is forcibly blanked. 0001 THRU : Signal is not blanked. This selects the freeze mode for still pictures. FREEZE SEL 606 OUT C KILL 609 EDH 0000 FIELD : Field freeze. 0001 FRAME : Frame freeze. When frame freeze has been selected, the frame slow status is established with the slow setting. This selects chroma color killer processing for the video output signals. 0000 B/W : No color signals are output. 0001 COLOR : Color signals are output. This selects whether to superimpose EDH onto the SDI output signals. 0000 OFF : EDH is not superimposed. 0001 ON : EDH is superimposed. OEven when ON is selected for this setting, EDH is not superimposed onto the signals output from the SDI OUT 3 connector if the SUPER switch on the front panel of the unit is set to ON. OWhen no optional board (AJ-YA755G) has been installed, setup menu No. 609 is not displayed. No./Item Description 610 PB/PR IN LV This selects the analog component input level. 0000 M II : M II level 0001 B-CAM : ß-CAM level 611 This selects Y/C separation processing for the composite input signals. YC SEP MODE 0000 B/W : The signals are processed as B/W signals. 0001 AUTO : The signals are automatically detected. 614 PB/PR OUT LV This selects the analog component output level. 0000 M II : M II level 0001 B-CAM : ß-CAM level 618 INTERPOLATE This selects the interpolation operation. Vertical interpolation is conducted automatically during slow-motion playback to reduce the vertical movement of the playback pictures. However, this menu item enables the interpolation operation to be forcibly turned off. 620 ESR MODE 0000 OFF : Interpolation is forcibly turned off. 0001 AUTO : Interpolation is automatically turned on during slow-motion playback. This selects the operation mode for edge subcarrier reduction (ESR) in the playback circuit. 621 CCR MODE 0000 OFF : The mode is forcibly set to OFF. 0001 AUTO : The mode is automatically set to ON or OFF depending on the VTR operation. This selects the cross color processing during playback. 0000 OFF : The cross color is output with no changes made. 0001 ON : The cross color can be reduced. The underlined items indicates the initial setting. 45