Panasonic AJSD755 AJSD755 User Guide - Page 77
VIDEO], AUDIO], Other Input/Output Connectors], Video output connector, Video signal adjustment
View all Panasonic AJSD755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Specifications [VIDEO] $ Video output connector Analog component output: BNCa3 (Y, PB, PR) Y: 1.0 V [p-p], PB/PR: 0.486/0.7 V [p-p] switchable, 75Ω (75% color bar, 7.5% setup) Analog composite output: BNCa3, video 1, video 2 (video/WFM selectable), video 3 (superimpose on/off) SDI output (option): BNCa3, complies with SMPTE 259M-C standard SDI 1, SDI 2, SDI 3 (superimpose on/off) SDTI output (option): BNCa2, complies with SMPTE 305M/321M standard $ Video signal adjustment Video output gain: ±3 dB Video output chroma gain: ±3 dB Video output HUE: ±30° Video output setup level: ±14 IRE Video output sync phase: ±15 µsec Video output SC phase: ±180° [AUDIO] $ Digital audio Sampling frequencies: 48 kHz (synchronous with video) Quantizing: 16 bits Frequency response: 20 Hz to 20 kHz ±1.0 dB (at the reference level) Dynamic range: Better than 90 dB (1 kHz, emphasis OFF, "A" weighted) Distortion: Less than 0.05% (1 kHz, emphasis OFF, reference level) Crosstalk: Less than -80 dB (1 kHz, between 2 channels) Wow & flutter: Below measurable limit Headroom: 20 dB De-emphasis: T1 = 50 µsec, T2 = 15 µsec (auto on/off) $ Cue track Frequency response: 300 Hz to 6 kHz (-5.0 dB to +3.0 dB) [AUDIO] $ Audio input connector Analog input (CH1, CH2): XLRa2, 600Ω/high impedance selectable (factory setting: high impedance), +4/0/-20 dBu selectable Digital input (CH1/CH2): BNCa1, AES/EBU format SDI input (option): BNCa2, active through, complies with SMPTE 259M-C/272MA standard $ Audio output connector Analog output (CH1, CH2): XLRa2, low impedance, +4/0/-20 dBu selectable Digital output (CH1/CH2): BNCa1, AES/EBU format, 75Ω, 1.0 ± 0.2 V [p-p] SDI output (option): BNCa3, 75Ω, complies with SMPTE 259M-C/272M-A standard Monitor output: XLRa2, low impedance, +4/0/-20 dBu selectable Headphones: Stereo mini jack, 8Ω, variable level [Other Input/Output Connectors] Time code input: XLRa1, 0.5 V to 8.0 V [p-p], 10 kΩ Time code output: XLRa1, low impedance, 2.0 V ± 0.5 V [p-p] RS-422A input: D-sub 9-pin, RS-422A interface RS-422A output: D-sub 9-pin, RS-422A interface RS-232C: D-sub 25-pin, RS-232C interface Parallel input/output: D-sub 25-pin Encoder remote: D-sub 15-pin Weight and dimensions when shown are approxlmately. Speclilcailons are subject to change without notice. 77