Panasonic AJSD755 AJSD755 User Guide - Page 43

VUSER menu, <TIME CODE&gt

Page 43 highlights

Setup menus USER menu No./Item Description 500 VITC BLANK For selecting whether to output the VITC signal at the positions selected by setup menu items No. 501 (VITC POS-1) and No. 502 (VITC POS-2). 501 VITC POS-1 502 VITC POS-2 503 TCG REGEN 0000 BLANK : VITC signals are not output. 0001 THRU : VITC signals are output. This sets the position where the VITC signal is to be inserted. 0000 10L : : 0006 16L : : 0010 20L The same line as the one used for the setup menu items No. 502 (VITC POS-2) and No. 662 (UMID POS) setting cannot be set. This sets the position where the VITC signal is to be inserted. 0000 10L : : 0008 18L : : 0010 20L The same line as the one used for the setup menu items No. 501 (VITC POS-1) and No. 662 (UMID POS) setting cannot be set. This selects the signal to be regenerated when the time code generator (TCG) in the REGEN mode. 0000 TC&UB : Both the time code and user bit are regenerated. 0001 TC : Only the time code is regenerated. 0002 UB : Only the user bit is regenerated. 504 This selects whether the time code is to be regenerated during automatic editing using REGEN MODE the unit's control panel. 0000 AS&IN : Time code is regenerated with assemble or insert editing. 0001 ASSEM : Time code is regenerated with assemble editing. 0002 INSRT : Time code is regenerated with insert editing. 0003 SW : Setting complies with TCG switch setting. No./Item Description 505 EXT TC SEL 506 BINARY GP 507 PHASE CORR This selects the time code to be used when an external time code is to be used. 0000 LTC : The LTC of the TIME CODE IN connector is used. 0001 VITC : The VITC of the input video signal is used. This sets the usage status of the user bit of the time code generated by the TCG. 0000 000 : NOT SPECIFIED (character set not specified) 0001 001 : ISO CHARACTER (8 bits character set based on ISO646, ISO2022) 0002 010 : UNASSIGNED 1 (undefined) 0003 011 : UNASSIGNED 2 (undefined) 0004 100 : UNASSIGNED 3 (undefined) 0005 101 : PAGE/LINE 0006 110 : UNASSIGNED 4 (undefined) 0007 111 : UNASSIGNED 5 (undefined) This selects whether to control the phase correction of the LTC which is output from the TIME CODE OUT connector. 0000 OFF : Phase correction control is not performed. 0001 ON : Phase correction control is performed. 508 TCG CF FLAG This selects whether the CF flag of the TCG is to ON. 0000 0001 OFF : CF flag is OFF. ON : CF flag is ON. 509 DF MODE This selects the DF or NDF mode for CTL and TCG. 0000 DF : The drop frame mode is used. 0001 NDF : The non-drop frame mode is used. Drop frame mode is valid only when the CONTROL switch is set to LOCAL or the setup menu No. 001 (LOCAL ENA) is set to ENA. 510 TC OUT REF This is used to switch the phase of the time code, which is output from the TIME CODE OUT connector, for the external LTC input when the TCG switch is at the EXT position. 0000 V OUT : Time code is synchronized with output video signal. 0001 TC_IN : Time code is synchronized with external time code input. The underlined items indicates the initial setting. 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78

43
Setup menus
The underlined items indicates the initial setting.
USER menu
<TIME CODE>
No./Item
Description
506
BINARY GP
This sets the usage status of the user bit of
the time code generated by the TCG.
0000
000
:
NOT SPECIFIED (character set not specified)
0001
001
:
ISO CHARACTER (8 bits character set based
on ISO646, ISO2022)
0002
010
:
UNASSIGNED 1 (undefined)
0003
011
:
UNASSIGNED 2 (undefined)
0004
100
:
UNASSIGNED 3 (undefined)
0005
101
:
PAGE/LINE
0006
110
:
UNASSIGNED 4 (undefined)
0007
111
:
UNASSIGNED 5 (undefined)
507
PHASE CORR
This selects whether to control the phase
correction of the LTC which is output from
the TIME CODE OUT connector.
0000
OFF
:
Phase correction control is not performed.
0001
ON
:
Phase correction control is performed.
508
TCG CF FLAG
This selects whether the CF flag of the TCG is
to ON.
0000
OFF
:
CF flag is OFF.
0001
ON
:
CF flag is ON.
509
DF MODE
This selects the DF or NDF mode for CTL and
TCG.
0000
DF
:
The drop frame mode is used.
0001
NDF
:
The non-drop frame mode is
used.
<Note>
Drop frame mode is valid only when the
CONTROL switch is set to LOCAL or the setup
menu No. 001 (LOCAL ENA) is set to ENA.
510
TC OUT REF
This is used to switch the phase of the time
code, which is output from the TIME CODE
OUT connector, for the external LTC input
when the TCG switch is at the EXT position.
0000
V
OUT
:
Time code is synchronized with output video
signal.
0001
TC_IN
:
Time code is synchronized with external time
code input.
No./Item
Description
500
VITC BLANK
For selecting whether to output the VITC
signal at the positions selected by setup
menu items No. 501 (VITC POS-1) and No. 502
(VITC POS-2).
0000
BLANK
:
VITC signals are not output.
0001
THRU
:
VITC signals are output.
501
VITC POS-1
This sets the position where the VITC signal
is to be inserted.
0000
10L
:
:
0006
16L
:
:
0010
20L
<Note>
The same line as the one used for the setup
menu items No. 502 (VITC POS-2) and No. 662
(UMID POS) setting cannot be set.
503
TCG REGEN
This selects the signal to be regenerated
when the time code generator (TCG) in the
REGEN mode.
0000
TC&UB
:
Both the time code and user bit are
regenerated.
0001
TC
:
Only the time code is regenerated.
0002
UB
:
Only the user bit is regenerated.
504
REGEN MODE
This selects whether the time code is to be
regenerated during automatic editing using
the unit
s control panel.
0000
AS&IN
:
Time code is regenerated with assemble or
insert editing.
0001
ASSEM
:
Time code is regenerated with assemble
editing.
0002
INSRT
:
Time code is regenerated with insert editing.
0003
SW
:
Setting complies with TCG switch setting.
505
EXT TC SEL
This selects the time code to be used when
an external time code is to be used.
0000
LTC
:
The LTC of the TIME CODE IN connector is
used.
0001
VITC
:
The VITC of the input video signal is used.
502
VITC POS-2
This sets the position where the VITC signal
is to be inserted.
0000
10L
:
:
0008
18L
:
:
0010
20L
<Note>
The same line as the one used for the setup
menu items No. 501 (VITC POS-1) and No. 662
(UMID POS) setting cannot be set.