Panasonic AJSD755 AJSD755 User Guide - Page 76
Specifications, GENERAL], VIDEO]
View all Panasonic AJSD755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Specifications [GENERAL] Power supply: AC 100 - 240 V, 50 - 60 Hz Power consumption: 110 W (with all options) indicates safety information. Operating ambient temperature: 41°F to 104°F (5°C to 40°C) Operating ambient humidity: 10% to 80% (no condensation) Weight: 33.0 lb (15.0 kg) Dimensions (WaHaD): 16 3/4a6 15/16a16 15/16 inch (424a175.2a430 mm) (Not including the support legs, connectors, and JOG dial) Recording format: DVCPRO/DV format selectable Recording video signal: 525i system Recording audio signal: 48 kHz 16-bit 2 channels Recording tracks: Digital video audio: helical track The time code is recorded in the sub-code area. Cue track: 1 track Control track: 1 track Tape speed: 33.820 mm/sec (DVCPRO) Recording time: 184 minutes (using the AJ-5P92LP) 66 minutes (using the AJ-P66MP) Tape: Metal tape FF/REW time: Less than 3 min (with AJ-5P92LP) Less than 2 min (with AJ-P66MP) Digital slow: -0.43a to +0.43a, +0.5a, +0.75a speed (DVCPRO) Editing accuracy: ±0 frames (using the time code) Tape timer accuracy: ±1 frame (using the continuous CTL signal) Servo lock time: Less than 0.5 sec (color framing/standby ON) [VIDEO] $ Digital video Sampling frequencies: Y: 13.5 MHz, PB/PR: 3.375 MHz Quantizing: 8 bits Video compression method: DV-Based compression (SMPTE 314M) Video compression rate: DVCPRO: 1/5 Error correction: Reed-Solomon product code Bit rate: DVCPRO: 25 Mbps $ Digital IN (option)/Analog component OUT Video bandwidth: Y : 30 Hz to 5.75 MHz (±0.5 dB) PB/PR : 30 Hz to 1.3 MHz (±0.5 dB), 1.5 MHz (-5.0 dB) S/N ratio: Better than 60 dB (Y) K factor: Less than 1% (Y 2T) $ Analog component IN/Analog component OUT Video bandwidth: Y : 30 Hz to 5.5 MHz (±1.0 dB), 5.75 MHz (-2.0 dB) PB/PR : 30 Hz to 1.3 MHz (±1.0 dB), 1.5 MHz (-5.0 dB) S/N ratio: Better than 55 dB K factor: Less than 1% (Y 2T) Y/PB, PR delay: Less than 20 ns $ Analog composite IN/Analog composite OUT Video bandwidth: Y : 30 Hz to 4.5 MHz (±1.0 dB), 5.5 MHz (-3.0 dB) Y/C delay: Less than 20 ns $ Video input connector Analog component input: BNCa3 (Y, PB, PR) Y: 1.0 V [p-p], PB/PR: 0.486/0.7 V [p-p] switchable, 75Ω (75% color bar, 7.5% setup) Analog composite input: BNCa2, loop-through, 75Ω on/off VIDEO:1.0 V [p-p] (75Ω) Reference input: Analog composite, BNCa2, loop-through, 75Ω on/off SDI input (option): BNCa2, active through, complies with SMPTE 259M-C standard SDTI input (option): BNCa1, complies with SMPTE 305M/321M standard 76