Panasonic AJSD755 AJSD755 User Guide - Page 49

Setup menus USER menu No./Item Description 728 EMBEDDED AUD This selects whether to superimpose the audio data onto the SDI output. 0000 OFF : Data is not superimposed. 0001 ON : Data is superimposed. When no optional board (AJ-YA755G) has been installed, setup menu No. 728 is not displayed. 731 This selects whether or not the cue signal is to be output to the main line output in the CUE OUT SEL search mode. 0000 OFF : CUE is not output. 0001 ON : CUE is output. OThis function works only when a setting other than MANU has been selected by setup menu No. 721 (MONI CH SEL). OThe main signal system output channels used for the CUE output differ depending on the setting selected by setup menu No. 735 (MON AUTO SEL). When L/R is selected: CUE is output to CH1 and CH4. When L is selected: CUE is output to CH1. When R is selected: CUE is output to CH2. OWhen PCM has been selected as the setup menu No. 721 (MONI CH SEL) setting, PCM is output. The underlined items indicates the initial setting. No./Item Description 733 CUE OUT This selects the timing for the output picture and CUE output when CUE has been selected for monitor output. 0000 NORMAL : The timing is aligned with the output picture. 0001 DIRECT : Whatever has been recorded on the tape is output with no delay. When DIRECT has been selected, the timing of the output picture and that of the cue output are not aligned properly. 734 MONI SEL INH This selects whether the operation of the MONITOR SELECT button on the front panel is to be enabled or disabled. 0000 OFF : Operation is enabled. 0001 ON : Operation is disabled. 0002 ON1 : Operation is disabled in the FULL display mode and enabled only in the FINE display mode. 735 MON AUTO SEL Although CUE is automatically output to the monitor output in accordance with the operation mode when a setting AUTO has been selected by setup menu item No. 721 (MONI CH SEL), the MON AUTO SEL setup menu item is used to select the monitor channel which is to be automatically switched to CUE. 0000 L/R : CUE is output to both the left and right channels. 0001 L: CUE is output to the left channel only. 0002 R: CUE is output to the right channel only. The table below shows how the CUE output to the monitor and main signal system outputs differs according to how the setup menu item (No. 721, No. 731 and No. 735) settings are combined. 731 CUE OUT SEL OFF ON 721 MONI CH SEL 735 MON AUTO SEL MANU ---------- L/R AUTO L R PCM ---------- MANU ---------- L/R AUTO L R PCM ---------- Monitor output Lch Rch PCM 21 PCM 21 CUE CUE CUE PCM 21 PCM 21 PCM 22 PCM 21 CUE CUE PCM 21 PCM 22 CUE PCM 22 PCM 21 CUE PCM 21 CUE PCM 22 Main signal system output CH1 CH2 PCM 21 PCM 21 PCM 22 PCM 21 CUE CUE PCM 21 PCM 22 PCM 22 PCM 21 CUE PCM 21 CUE PCM 22 21: PCM audio signal output is muted when the VTR is played outside the -0.43 to +1 normal speed. 22: PCM audio signal output is muted when the VTR is played outside the -10 to +10 normal speed. When either AUTO is selected, the PCM audio signal is output within -0.43 to +1 normal speed even in the automatic CUE output mode. 49