Panasonic AJSD755 AJSD755 User Guide - Page 36

Setup menus USER menu No./Item Description 100 This selects the direct search dial operation. SEARCH ENA 101 SHTL MAX 102 FF. REW MAX 104 REF ALARM 0000 DIAL : For direct search dial operations. 0001 KEY : Operation is not transferred to the search mode unless the search button is pressed. This sets the maximum speed for shuttle operations. 0000 0001 0002 a8.4 : 8.4a normal speed a16 : 16a normal speed a32 : 32a normal speed This sets the maximum speed for FF and REW operations. 0000 a32 : 32a normal speed 0001 a60 : 60a normal speed 0002 a100 : 100a normal speed With mini DV or mini DVCAM cassette, the maximum speed is set to 32a regardless of this item's settings. This selects whether to warn the operator when the REF. VIDEO signal has not been connected. 0000 OFF : Warning is not given. 0001 ON : Warning is given by the flashing STOP lamp. Video and audio output may be disturbed when the reference video signal is not input, so it is recommended that a system which inputs the reference video signal be used. No./Item Description 105 This selects the VTR mode in which the EE status is established when the MODE switch AUTO EE SEL is set to EE. 0000 S/F/R : EE status is established in STOP, FF, REW and EJECT modes. 0001 STOP : EE status is established in STOP and EJECT modes. 0002 BLACK : EE status is established in STOP and EJECT modes. However, if the MODE switch is set to TAPE, the picture becomes black and the sound is muted when the tape is ejected. 0003 BLACK1 : EE status is established in STOP, FF, REW and EJECT modes. However, if the MODE switch is set to TAPE, the picture becomes black and the sound is muted when the tape is ejected. 0004 GRAY : EE status is established in STOP and EJECT modes. However, if the MODE switch is set to TAPE, the picture becomes gray and the sound is muted when the tape is ejected. 0005 GRAY1 : EE status is established in STOP, FF, REW and EJECT modes. However, if the MODE switch is set to TAPE, the picture becomes gray and the sound is muted when the tape is ejected. 106 This selects the EE mode output signals. EE MODE SEL 0000 NORMAL : Signals are output with a delay equivalent to the length of internal signal processing. 0001 THRU : Signals are output directly, without internal processing, and so are output with no delay. When the unit is in edit mode and SDTI/1394 or SG has been selected for the input signals by the INPUT SELECT button, internal operations are forcibly set to NORMAL. 107 PLAY DELAY This set the play delay time in frame increments. 0000 0 : : 0015 15 108 This selects the CAPSTAN LOCK mode. CAP. LOCK 0000 0001 2F : 2F mode 4F : 4F mode The underlined items indicates the initial setting. 36