Panasonic AJSD755 AJSD755 User Guide - Page 42
<tape Protect>, Standby Off Half Loading Mode.
View all Panasonic AJSD755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Setup menus USER menu No./Item Description 400 STILL TIMER This menu item is for selecting the time to elapse before the tape protection mode is established when a DVCPRO tape is used. It is also for selecting the time to elapse before the tape protection mode is established when the VTR has been left standing in the STOP or search STILL (JOG, SLOW or SHTL) mode. (Unit: s = second, min = minute) 401 SRC PROTECT 0000 0001 0002 0003 0004 0005 0006 0007 0008 0.5s 5s 10s 20s 30s 40s 50s 1min 2min OSTEP FWD and HALF LOADING are provided in the tape protection mode. Either of these can be set for STOP and SEARCH STILL. OThe cumulative standby time at the same tape position increases when transmitting programs or otherwise using identical materials repeatedly. In order to protect the tape, it is recommended that the shortest possible setting for the standby time in the same tape location is used. When the time selected as the setup menu item No. 400 (STILL TIMER) setting elapses while the unit is in the search STILL (JOG/SLOW/SHTL) mode, the unit automatically enters one of the tape protection modes. This menu item is for selecting which tape protection mode the unit is to enter. 0000 STEP : STEP FWD 0001 HALF : HALF LOADING When STEP FWD is selected, the unit automatically goes into the STANDBY OFF (HALF LOADING) mode when the total time for which the unit is left standing in the still status reaches 30 minutes (or 1 minute for a DV/DVCAM tape). 402 DRUM STDBY This selects the drum operation in the STANDBY OFF (HALF LOADING) mode. 0000 0001 OFF : The drum stops rotating. ON : The drum continues rotating. No./Item Description 403 STOP PROTECT When the time selected as the setup menu item No. 400 (STILL TIMER) setting elapses while the unit is in the STOP mode, the unit automatically enters one of the tape protection modes. This menu item is for selecting which tape protection mode the unit is to enter. 0000 STEP : STEP FWD 0001 HALF : HALF LOADING When STEP FWD is selected, the unit is automatically transferred to the STANDBY OFF (HALF LOADING) mode when the total time during which it has been left standing in the STOP mode reaches 30 minutes (or 1 minute for a DV/DVCAM tape). 404 DV STILL TMR This menu item is for selecting the time to elapse before the tape protection mode is established when a DV or DVCAM tape is being used. It is for selecting the time to elapse before the tape protection mode is established when the VTR has been left standing in the STOP or search STILL (JOG, SLOW or SHTL) mode. (Unit: s = second, min = minute) 0000 0.5s 0001 5s 0002 10s 0003 20s When using the unit in tempuratures below 59°F (15°C), set this item to 10 seconds to protect the tape and video heads. The underlined items indicates the initial setting. 42