Panasonic AJSD755 AJSD755 User Guide - Page 34

Setup menus USER menu No./Item Description 000 P-ROLL TIME This sets the preroll time. The preroll time can be set from 0 to 15 seconds in 1-second increments. 001 LOCAL ENA 0000 : 0005 : 0015 0s : When the automatic editing 5s mode [PREVIEW, AUTO EDIT] : is set, the unit will not operate if 15s the preroll time is set to 0 seconds. This selects the buttons which can be operated on the front panel when the CONTROL switch has been set to REMOTE. 002 TAPE TIMER 003 REMAIN SEL 0000 DIS : No buttons can be operated. 0001 ST&EJ : Only the STOP and EJECT buttons can be operated. 0002 ENA : All buttons except for the RECORDER and PLAYER buttons can be operated. This selects the 12 or 24 hour display for the CTL counter. 0000 0001 ±12h : 12 hour display 24h : 24 hour display This selects whether the remaining tape time and total tape length are to be displayed in the superimposed display of the VIDEO OUT 3/ SDI OUT 3 (AJ-YA755G, optional) connector signals. 0000 OFF : No display. 0001 2L : The remaining tape time is displayed on the second line. 0002 1L : The remaining tape time is displayed on the first line. 0003 R/TTL : The remaining tape time is displayed on the first line, and the total tape length is displayed in the second line. OWhen "2L" is selected, the remaining tape time is not displayed if "TIME" has been selected as the setup menu item No.008 (DISPLAY SEL) setting. OWhen "R/TTL" is selected, the total tape length is not displayed if "TIME" has been selected as the setup menu item No.008 (DISPLAY SEL) setting. No./Item Description 006 This selects whether or not to synchronize between two VTRs. SYNCHRONIZE 0000 OFF : No synchronization. The editing points deviate several frames, but editing can be started quickly. 0001 ON : Synchronization. Allows for error-free editing. 008 DISPLAY SEL This selects what information is to be provided by the time code and other super displays output to the VIDEO OUT 3/SDI OUT 3 (AJ-YA755G, optional) connector. 0000 TIME : Data only. (The data indicates the value for whichever of CTL, TC or UB currently selected by the COUNTER button.) 0001 T&STA : Data and operation status. 0002 T&S&M : Data, operation status and mode. 0003 T&RT : Data and REC TIME 0004 T&YMD : Data and REC DATE (year/month/day) 0005 T&MDY : Data and REC DATE (month/day/year) 0006 T&DMY : Data and REC DATE (day/month/year) 0007 T&UB : Data and user's bit. However, when UB has been selected with the COUNTER button, the time code is displayed after the user's bit. 0008 T&CTL : Data and CTL data. However, when CTL has been selected with the COUNTER button, the time code is displayed after the CTL data. 0009 T&T : Data and time code. 0010 VITC: The time code and user's bit recorded in the VAUX area are displayed. OMode display: DVCPRO (25 Mbps) = DVCPRO, DV = DV, DVCAM = DVCAM OAn error message appears if a warning or error has occurred when "T&S&M" has been selected as this setting. OREC TIME and REC DATE are displayed during DV/DVCAM, playback only. With the DVCPRO (25 Mbps) format, the operating mode is displayed. The underlined items indicates the initial setting. 34