Panasonic AJSD755 AJSD755 User Guide - Page 37

Setup menus USER menu No./Item Description No./Item Description 109 AUTO REW 110 MEMORY STOP This selects whether to rewind the tape automatically to the tape start when the tape end is detected. 0000 0001 OFF : The tape stops at the tape end. ON : The tape is rewound to the tape start. This selects whether the VTR is to stop automatically when the counter value reaches "0" during a fast forwarding or rewinding operation in the CTL mode. 0000 OFF : The VTR does not stop. 0001 ON : The VTR stops automatically. OThe stop mode concerned is either the stop or the still-picture (SHTL STILL or SLOW STILL) mode depending on the setup menu No. 315 (AFTER CUE-UP) setting. OWhen both the AUTO REW function and MEMORY function have been selected at the same time, the AUTO REW function takes precedence. Memory stop function Zero point The MEMORY STOP function does not work if it is activated within a range of 0 ± 2 frames. 3 REW button 4 FF button 1 FF button 2 REW button ! When the FF button is pressed, the VTR performs the regular fast forward operation since the zero point is not located in the direction of operation. @ When the REW button is pressed, the PREROLL lamp lights (the SHTL lamp lights as well), the VTR proceeds with the preroll operation, and it automatically stops when it reaches the position where the counter reads "0." # When the REW button is pressed, the VTR performs the regular rewinding operation since the zero point is not located in the direction of operation. $ When the FF button is pressed, the PREROLL lamp lights (the SHTL lamp lights as well), the VTR proceeds with the preroll operation, and it automatically stops when it reaches the position where the counter reads "0." 111 FRZ MODE SEL 112 V IN SEL INH This selects the output picture in the STANDBY OFF (HALF LOADING) and EJECT modes. 0000 DIS : The video output is muted. 0001 STB OFF : When the STANDBY OFF (HALF LOADING) mode is established, the picture being played back at the time is frozen and output. 0002 SOF&EJ : When the STANDBY OFF (HALF LOADING) or EJECT mode is established, the picture being played back at the time is frozen and output. OFreeze status complies with the setup menu item No. 605 (FREEZE SEL) setting. OIn the EJECT mode, freeze is output only when BLACK, BLACK1, GRAY or GRAY1 is selected as the setup menu item No. 105 (AUTO EE SEL) setting. This selects whether video input switching using the INPUT SELECT button is to be enabled or disabled. 113 A IN SEL INH 0000 OFF : Video input switching using the INPUT SELECT button is enabled. 0001 ON : Video input switching using the INPUT SELECT button is disabled. 0002 REC : Video input switching using the INPUT SELECT button after the unit has been transferred to a recording (but not editing) mode is disabled. This selects whether audio input switching using the INPUT SELECT button is to be enabled or disabled. 0000 OFF : Audio input switching using the INPUT SELECT button is enabled. 0001 ON : Audio input switching using the INPUT SELECT button is disabled. 0002 REC : Audio input switching using the INPUT SELECT button after the unit has been transferred to a recording (but not editing) mode is disabled. Even when the ON or REC setting is selected to disable audio input switching using the INPUT SELECT button, it is still possible to set the setup menu items No. 715 (CH1 IN SEL), No. 716 (CH2 IN SEL) and No. 719 (D IN SEL12). The underlined items indicates the initial setting. 37