Panasonic KX-HN1003 HomeHawk App Users Guide - Page 69

Registering other mobile devices to the floor camera

Page 69 highlights

Using a shelf, floor, and window camera 7 When prompted, enter a name for the camera and mobile device, and then tap [OK]. R The camera name setting is used by your mobile device to identify the camera. This is useful when you have multiple cameras. R The mobile device name setting is used to identify your mobile device. This is useful when performing certain operations, such as deregistering. 8 When [Congrats!] is displayed, tap [Explore HomeHawk]. R A screen explaining how to insert an SD card into the camera is displayed. If you will use an SD card to record images, follow the on-screen instructions and insert an SD card into the camera. R A screen asking you to set the home position of geo-fencing ( "Automatic Mode Switching", Page 87) is displayed, tap [Set Current pos as Home] ® [OK]. R The app's home screen is displayed when initial setup is completed. Basic Setup 1 Enter the password for the wireless network and then tap [Next]. 2 Depending on the type of mobile device that you use, proceed as follows. Android users: Go to step 3. iOS 11.0 and later users: Tap [Join]. iOS 10.x users: Change your mobile device's wireless network setting temporarily so that it connects to the camera directly. R Open your mobile device's [Settings] app, tap [Wi-Fi], select "Pansonic_Camera", enter "12345678" as the password, and then tap [Join]. Note: R Your mobile device starts searching for the camera. R When [Linking] is displayed, wait for up to about 3 minutes until the camera is connected to your wireless network and mobile device. 3 Press the SETUP button on the camera for about 2 seconds until the camera beeps. R The camera's LED indicator starts blinking in green. 4 When prompted, create a login password for the camera, and then tap [Next]. 5 When prompted, enter a name for the camera and mobile device, and then tap [OK]. R The camera name setting is used by your mobile device to identify the camera. This is useful when you have multiple cameras. R The mobile device name setting is used to identify your mobile device. This is useful when performing certain operations, such as deregistering. 6 When [Congrats!] is displayed, tap [Explore HomeHawk]. R A screen explaining how to insert an SD card into the camera is displayed. If you will use an SD card to record images, follow the on-screen instructions and insert an SD card into the camera. R A screen asking you to set the home position of geo-fencing ( "Automatic Mode Switching", Page 87) is displayed, tap [Set Current pos as Home] ® [OK]. R The app's home screen is displayed when initial setup is completed. Registering other mobile devices to the floor camera Confirm the following before you begin. - Make sure you have installed the [HomeHawk] app on your mobile device - Make sure your wireless router and the camera are turned on 69

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200

7
When prompted, enter a name for the camera and mobile device, and then tap
[OK]
.
R
The camera name setting is used by your mobile device to identify the camera. This is useful when
you have multiple cameras.
R
The mobile device name setting is used to identify your mobile device. This is useful when
performing certain operations, such as deregistering.
8
When
[Congrats!]
is displayed, tap
[Explore HomeHawk]
.
R
A screen explaining how to insert an SD card into the camera is displayed.
If you will use an SD card to record images, follow the on-screen instructions and insert an SD
card into the camera.
R
A screen asking you to set the home position of geo-fencing ( “Automatic Mode Switching”,
Page 87) is displayed, tap
[Set Current pos as Home]
®
[OK]
.
R
The app’s home screen is displayed when initial setup is completed.
Basic Setup
1
Enter the password for the wireless network and then tap
[Next]
.
2
Depending on the type of mobile device that you use, proceed as follows.
Android users:
Go to step 3.
iOS 11.0 and later users:
Tap
[Join]
.
iOS 10.x users:
Change your mobile device’s wireless network setting temporarily so that it connects to the camera
directly.
R
Open your mobile device’s
[Settings]
app, tap
[Wi-Fi]
, select “Pansonic_Camera”, enter
“12345678” as the password, and then tap
[Join]
.
Note:
R
Your mobile device starts searching for the camera.
R
When
[Linking]
is displayed, wait for up to about 3 minutes until the camera is connected to your
wireless network and mobile device.
3
Press the
SETUP
button on the camera for about 2 seconds until the camera beeps.
R
The camera’s LED indicator starts blinking in green.
4
When prompted, create a login password for the camera, and then tap
[Next]
.
5
When prompted, enter a name for the camera and mobile device, and then tap
[OK]
.
R
The camera name setting is used by your mobile device to identify the camera. This is useful when
you have multiple cameras.
R
The mobile device name setting is used to identify your mobile device. This is useful when
performing certain operations, such as deregistering.
6
When
[Congrats!]
is displayed, tap
[Explore HomeHawk]
.
R
A screen explaining how to insert an SD card into the camera is displayed.
If you will use an SD card to record images, follow the on-screen instructions and insert an SD
card into the camera.
R
A screen asking you to set the home position of geo-fencing ( “Automatic Mode Switching”,
Page 87) is displayed, tap
[Set Current pos as Home]
®
[OK]
.
R
The app’s home screen is displayed when initial setup is completed.
Registering other mobile devices to the floor camera
Confirm the following before you begin.
Make sure you have installed the
[HomeHawk]
app on your mobile device
Make sure your wireless router and the camera are turned on
69
Using a shelf, floor, and window camera