Panasonic KX-R530 Operating Instructions - Page 12

2-1 SETTINGS The unit will automatically set typing mode, pitch, line spacing, and keyboard as set when the unit was last used. If you want to change the setting, simply do the following. First, press the CODE+3, 4, 5, or 6 keys. For example, the display will show: MODE PITCH LINE SP KB TPW 10 1 I After the display shows the typing mode, pitch, line spacing, and keyboard settings, you can change each function as follows. Selecting typing mode (TPW • L/L • JST) Every time you press the "3" key, the typing mode changes as shown. ►TPW L/L JST Typewriter (TPW) Mode The characters entered will be printed immediately. You can set margins and tabs in this mode. You can select either NORM or AUTO carriage return in this mode by pressing CODE+A. LINE by LINE (L/L) Typing Mode When character keys are pressed, the respective characters appear on the display and can be edited (inserted, deleted, corrected) on display before they are printed. When typing a character after entering a "Hyphen" or "Space" within the "Hot Zone" or beyond the "Right Margin", Automatic Carriage Return will occur. Justify (JST) Printing Mode The typed characters will first appear on the display at which time the character can be edited before they are printed. When the characters exceed the right margin, the typewriter will start printing the line up to the last word within the right margin, aligning the last character of each line at the right margin and returning the carriage automatically. To print a line which does not reach the right margin, press the RETURN key. Selecting Pitch (10.12.15) Every time you press the "4" key, the pitch changes as shown. ►10 12 15 10 10 characters per inch (2.54 cm) or 100 characters per line can be printed. 12 12 characters per inch (2.54 cm) or 120 characters per line can be printed. 15 15 characters per inch (2.54 cm) or 150 characters per line can be printed. 12