Panasonic KX-R530 Operating Instructions - Page 18

4 CODE Press the CODE+CANCEL (g) keys. 5 Retype the incorrect character. This will lift the character off the paper. 6 Type the correct character. •Repeat steps 2-6 to correct errors on another line. •Repeat steps 3.6 to correct another character on the same line. 7 II Press the RELOC key. This will position the carriage to the end of the last line. The symbol "E" will disappear from the display. 1Disabling Print When Making Manual Corrections The CODE+TEXT keys may be used to make manual corrections. This feature is especially helpful when making many corrections successively. 1 CODE \X Press the CODE+CANCEL (a) keys. The carriage will automatically return to the left margin. 60 The display will show the symbol "E" 2 )DE Press the CODE+INDEX keys to position the carriage at the beginning of the line on which the correction is to be made. 3 CODE P 1 60 Press the CODE+TEXT keys. The display will show the symbol " P 4 Position the carriage over the error. 5 Retype the error. This information has now been entered back into memory but has not reprinted on the paper. 6 CODE Press the CODE+TEXT keys. 7 QUICK ERASE Press the CANCEL (a) or QUICK ERASE key to delete the entered characters. 8 Type the correct character. •Repeat steps 2-8 for each error to be corrected. 9 II Press the RELOC key. This will position the carriage to the right of the character printed last before cor- "or rection. The symbol will disappear from the display. In the Justify Printing Mode: •Perform the steps 1-2. •Press the CODE+TEXT keys. •Retype the entire line with the error, and continue typing the line until the carriage reaches the right margin. It is necessary to type beyond the error line so that the typewriter can perform its justification. •Press the BACKSPACE or SPACE BAR to position the carriage on the error. •Press the CANCEL (a) key to delete the error. •Type the correct characters. •Press the CODE+TEXT keys or RETURN key. 18