Panasonic KX-R530 Operating Instructions - Page 46
Others
UPC - 037988700851
View all Panasonic KX-R530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
6-3 OTHERS •Check the points below before returning your typewriter for service. Symptom Cause Remedy/check No operation; even when keys are pressed, nothing appears on the display. The POWER switch is turned "OFF" or power cord is unplugged. The LCD contrast control is set to low contrast. Turn the POWER switch "ON". Plug in the power cord. Adjust the setting of the LCD contrast control. Unit does not print correctly, or printing Is blurred. Paper release lever is in the release position. Push lever to the lock position. No deletion even with the CANCEL (0 key; blurred characters. End of ribbon cassette or correction tape. Correction tape is not installed, or installed incorrectly. Replace with new ribbon cassette or correction tape. Install correction tape. Buzzer sounds during typing and typing is disabled (keys do not function). Carriage at right margin. Press the RETURN key and move carriage to next line. Press the MAR REL key and continue printing on same line. Text memory is full. Re-edit the data or cancel the text memory mode. The unit does not operate properly. The error buzzer sounds when typing and/or keys do not function. Text Memory may contain garbled characters. Noise on the AC line or static electricity may prevent the unit from operating properly. Turn the POWER "OFF" for a few seconds then "ON" again. If the unit still does not function properly turn the POWER "OFF", press and hold the CODE+SHIFT keys and turn the POWER "ON". This performs a total reset which clears all memory and margin formats. Should your Panasonic product ever require service, consult your authorized Panasonic dealer for detailed instructions. 6 46