Panasonic PTAE4000 Operating Instructions - Page 20

PICTURE menu Remote control Control panel CONTRAST You can adjust the contrast of the projected image. Adjust the BRIGHTNESS in advance if necessary. Lower Higher See "Navigating through the MENU" on page 16. See "Menu list" on page 17. Setting range: −64 to +64 PICTURE MODE Depending on the projection environment, you can use these preset parameter settings to optimise image projection. Press ◄ ► to cycle through the options. NORMAL CINEMA3 DYNAMIC COLOR1 CINEMA2 COLOR2 CINEMA1 BRIGHTNESS You can adjust the brightness of the projected image. Darker Brighter Setting range: −32 to +32 COLOR You can adjust the color saturation of the projected image. NORMAL DYNAMIC COLOR1 COLOR2 CINEMA1 CINEMA2 CINEMA3 Setting for a general image, such as sports programme or TV games. Bright and sharp setting. Setting for HDTV standard in ITU-R BT. 709 and color temperature 6 500 K at the default setting of the PICTURE menu items. Setting for DCDM standard (SMPTE431-2) and color temperature 6 300 K at the default setting of the PICTURE menu items. Setting tuned by top Hollywood colorists. Deeper and more rich color setting Vivid and crisp color setting. NOTE: •• It may take a while until the selected mode is stabilized. Lighter Darker Setting range: −32 to +32 When RGB/YPBPR signal is connected, only available with the following signals. 1 125 (1 080)/60i 1 125 (1 080)/50i 1 125 (1 080)/60p 1 125 (1 080)/50i TINT You can adjust the skin tone in the projected image. More reddish More greenish Setting range: −32 to +32 When COMPUTER signal is connected, only available with the following signals. 1 125 (1 080)/60i 1 125 (1 080)/50i 1 125 (1 080)/60p 1 125 (1 080)/50i SHARPNESS You can adjust the sharpness of the projected image. Less sharp More sharp Setting range will vary according to the selected input signal. 20 - ENGLISH