Panasonic PTAE4000 Operating Instructions - Page 34
WSS, OVER SCAN, KEYSTONE, AUTO SETUP, Shrink, Enlarge
View all Panasonic PTAE4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
POSITION menu WSS WSS (Wide Screen Signalling) detects if a PAL/ 625p (576p)/625i (576i) signal is input and that signal has an identification signal, and switch the aspect ratio to required setting automatically. You can switch the system off manually. (Available with VIDEO/S-VIDEO/ COMPONENT signals only) OVER SCAN If the 4 edges of an image is partly dropped, you can use this function to adjust and project it properly. Setting range: 0 to +10 OVER SCAN is not available with COMPUTER signals. Shrink Enlarge KEYSTONE If the projector is aligned non-perpendicularly to the screen, or if the projection screen has an angled surface, you can correct the keystone vertically. Image Operation Setting range: −32 to +32 NOTE: •• You can correct the distortion ± 30 degrees from the vertical plane. For a better quality image, installing the projector with minimum distortion is recommended. •• Some distortion may be retained for the lens shift adjustment. •• The distortion of the main menu screen is not correctable. •• The result of the keystone correction will affect the aspect ratio and the size of the image. AUTO SETUP You can adjust V-POSITION, H-POSITION, DOT CLOCK and CLOCK PHASE automatically when the computer signal is detected. Press the ENTER button to adjust these at the same time. 34 - ENGLISH