Panasonic PTAE4000 Operating Instructions - Page 25
English - 25, Rnote
View all Panasonic PTAE4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
OUTPUT 333 Adjusting the OUTPUT level. To adjust the OUTPUT level from the present setting, press ▲ ▼ continuously until it reaches to your desired level. It can move up and down but cannot be set beyond the adjacent points. Ex. Press ▲ in the Y ADJUST menu and move the selected point upward. Y ADJUST 0% 50% 100% OUTPUT POINT 5 INPUT INPUT 50% RESET OUTPUT +10 Y ADJUST 0% 50% 100% MOVE UP PICTURE menu 444 Changing the adjustment by different color types. To switch to a different color ADJUST menu, press the ENTER button continuously until it reaches your desired color ADJUST menu. Y ADJUST R ADJUST B ADJUST G ADJUST You can also switch each different color ADJUST menu through the GAMMA ADJUSTMENT menu. Select your required color ADJUST (Y ADJUST, R ADJUST, G ADJUST, B ADJUST) with ▲ ▼ in the GAMMA ADJUSTMENT menu and press the ENTER button. GAMMA ADJUSTMENT ENTER SELECT RETURN ADJUSTMENT MODE GAMMA HIGH GAMMA MID GAMMA LOW POINT Y ADJUST R ADJUST G ADJUST B ADJUST INITIALIZE ADVANCED 5 R ADJUST 0% 50% 100% POINT 5 INPUT INPUT 50% RESET OUTPUT +30 OUTPUT INPUT POINT 5 INPUT 50% RESET OUTPUT +10 555 Setting the OUTPUT levels back to the default setting. To set the OUTPUT level on the selected point back to the default setting "0", press the DEFAULT button on the remote control. NOTE: •• Individual INPUT levels cannot be set back to their default settings by pressing the DEFAULT button. Please press ◄ ► to move back themselves if needed. •• In the Y ADJUST menu, if you press the DEFAULT button, all Y/R/G/B output settings will go back to the default setting "0". •• Adjustable range depends on the input signal. ENGLISH - 25