Panasonic PTAE4000 Operating Instructions - Page 4
Getting Started, Setting up, Screen size and throw distance
View all Panasonic PTAE4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Getting Started SSeettitntgiunpg up Screen size and throw distance You can adjust the projection size with 2 × zoom lens. Calculate and define the throw distance as follows. SH SD Projected image SW Screen All measurements and the calculation results below are approximate and may differ from the actual measurements. Throw distance (16:9) Throw distance (2.35:1) Screen Diagonal Minimum distance Maximum distance Minimum distance (SD) (LW) (LT) (LW)*1 1.02 m (40") 1.2 m (3'11") 2.3 m (7'6") 1.3 m (4'3") 1.27 m (50") 1.5 m (4'11") 2.9 m (9'6") 1.6 m (5'3") 1.52 m (60") 1.8 m (5'10") 3.5 m (11'5") 1.9 m (6'2") 1.78 m (70") 2.1 m (6'10") 4.1 m (13'5") 2.2 m (7'2") 2.03 m (80") 2.4 m (7'10") 4.7 m (15'5") 2.6 m (8'6") 2.29 m (90") 2.7 m (8'10") 5.3 m (17'4") 2.9 m (9'6") 2.54 m (100") 3.0 m (9'10") 5.9 m (19'4") 3.2 m (10'6") 3.05 m (120") 3.6 m (11'9") 7.2 m (23'7") 3.8 m (12'5") 3.81 m (150") 4.5 m (14'9") 9.0 m (29'6") 4.8 m (15'9") 5.08 m (200") 6.0 m (19'8") 12.0 m (39'4") 6.4 m (21'0") 6.35 m (250") 7.6 m (24'11") 15.0 m (49'2") 8.0 m (26'3") 7.62 m (300") 9.1 m (29'10") 18.0 m (59') 9.6 m (31'6") **** When using both 2.35:1 and 16:9 aspect images onto a 2.35:1 sized screen. Maximum distance (LT) 2.3 m 2.8 m 3.3 m 3.8 m 4.2 m 4.7 m 5.7 m 7.1 m 9.6 m 12.0 m 14.4 m (7'6") (9'2") (10'9") (12'5") (13'9") (15'5") (18'8") (23'3") (31'6") (39'4") (47'2") JJ Calculation methods for screen dimensions You can calculate more detailed screen dimensions from the screen diagonal. Screen height (SH) Screen width (SW) Minimum distance (LW) Maximum distance (LT) 16:9 size = SD (m) × 0.490 = SD (m) × 0.872 = SD (m) × 1.189 − 0.04 = SD (m) × 2.378 − 0.05 2.35:1 size = SD (m) × 0.392 = SD (m) × 0.920 = SD (m) × 1.256 − 0.04 = SD (m) × 1.899 − 0.05 NOTE: •• You can tilt the projector body less than approximately ±30 ° vertically and ±10 ° horizontally. +30 ° Overtilting may result in shortening the component's life. •• Do not cover the air exhaust/intake ports or place anything within 50 cm (19 5/8") of them. −30 ° 4 - ENGLISH