Panasonic VDRM55PP Dvd Video Camera-oem - Page 50
Basic Techniques, Basic Operation Of Dvd Video Camera
View all Panasonic VDRM55PP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Basic Techniques This section explains the basic techniques of recording movies and still images, and also basic settings on DVD Video Camera. Basic Operation of DVD Video Camera Turning DVD Video Camera On or Off Set the switch to the appropriate recording function while holding down the button to the right of the power switch. Rotate Align with " ": this position To record still on SD While Memory Card or miniSD pressing Memory Card "OFF": The DVD Video Camera will turn off. " ": To record movie on DVDRAM or DVD-R disc Note: • Once you turn the DVD Video Camera on to let it recognize the disc, you can immediately record or play back the same disc when the DVD Video Camera is turned on again. However, if the disc is left in the camera for an extended period, it will take some time for the camera to recognize the disc again (See page 149). • It will take some time for the DVD Video Camera to display the Disc navigation screen after power is turned on. • When you turn the DVD Video Camera on, the ACCESS indicator will light or blink to show that the DVD Video Camera is recognizing the disc or card: During this time, no operation, such as recording, can be performed. After several seconds, the ACCESS indicator will go out, and operating the DVD Video Camera will be possible. If the ACCESS indicator does not go out, refer to "Check 4" on page 149. " ": To record still on DVDRAM disc. Power ON status During playback, set the power switch to " " or " " when using disc, or set it to " " when using card. Turn the switch while holding down the button at the right of switch. ACCESS/PC indicator CARD ACCESS indicator • When the DVD Video Camera is turned on, the self- diagnosis function operates and a message may appear. In this case, refer to "Error Messages" on page 151 and take corrective action. • While the ACCESS/PC or CARD ACCESS indicator is lit or blinking, do not cause impact or vibration to the DVD Video Camera. 50