Panasonic WJHD316 WJHD309 User Guide - Page 106

8 Recording Rate and Image Quality for Each Camera Channel Perform the settings for recording rate, image quality and recording duration for each camera channel (only for preevent recording and post-event recording). Perform the settings for each recording mode. Assign the recording rate for each camera channel as described in "Recording Rate for Each Recording Mode" above. The following are for the recording rate. When OFF is selected, images from the selected camera channel will not be recorded. OFF/0.1 ips/0.2 ips/0.3 ips/0.4 ips/0.5 ips/1 ips/1.7 ips/ 2.5 ips/4.2 ips/5 ips/6.3 ips/8.3 ips/12.5 ips/25 ips/50 ips AUTO: The recording rate will be set automatically. (Not possible for pre-event recording and post-event recording) Note: When "AUTO" is selected for a camera channel, the maximum recording rate of this camera channel will be one of the following parameters but less than the value resulting from the following formula. Parameters: 0.1 ips/0.2 ips/0.3 ips/0.4 ips/0.5 ips/1 ips/2 ips/3 ips/ 5 ips/6 ips/7.5 ips/10 ips/15 ips/30 ips/60 ips Formula: (Recording rate of each recording mode) - (Recording rate of camera channels whose recording rate is numerically set (ips)) Number of camera channels whose recording rate is AUTO However, when "FRAME 3D ON", "FRAME 3D OFF" or "SIF" is selected, the maximum recording rate of this camera channel will be up to 25 ips. Important: The total of the recording rates of camera channels in the same recording mode must be less than the recording rate as described in "Recording Rate for Each Recording Mode" above. Examples: When selecting "FIELD" for resolution, "12.5 ips" for manual recording, "12.5 ips" for schedule recording, "25 ips" for event recording: Total recording rates of CAM 1 - 16 (manual recording): less than 12.5 ips Total recording rates of CAM 1 - 16 (schedule recording): less than 12.5 ips Total recording rates of CAM 1 - 16 (event recording): less than 25 ips When the total of the recording rates becomes more than the set value, the recording mode section will turn red. Recording Program 1 SETUPIMREeNsUolutiMoanintenance I RecordingSwTitacbhelre Recording FIELDEvent Display Comm Shedule System LIVE Manual REC 15 ips Schedule REC 15 ips Event REC 30 ips Time Table MANMUOALN 12AM 6AM 12PM SCHEDULE PRE EVENT 6PM POST EVENT 12AM REC Prog RATE QUALITY RATE QUALITY RATE QUALITY TIME RATE QUALITY TIME CAM1 AUTO TUSEFA 1ips SFA 1ips SFA 5s 1ips SFA 30s Event PrCoAgM2 AUTO SFA 1ips SFA 1ips SFA 5s 1ips SFA 30s CAM3 Special DCaAyMs4 AUTO WSEFDA AUTO SFA 1ips 1ips SFA SFA 1ips 1ips SFA SFA 5s 1ips SFA 30s 5s 1ips SFA 30s CAM5 AUTO THSUFA 1ips SFA 1ips SFA CAM6 AUTO SFA 1ips SFA 1ips SFA 5s 1ips SFA 30s 5s 1ips SFA 30s CAM7 AUTO FRSIFA 1ips SFA 1ips SFA CAM8 AUTO SFA 1ips SFA 1ips SFA 5s 1ips SFA 30s 5s 1ips SFA 30s CAM9 AUTO SASTFA 1ips SFA 1ips SFA CAM10 AUTO SFA 1ips SFA 1ips SFA 5s 1ips SFA 30s 5s 1ips SFA 30s CAM11 AUTO SUSNFA 1ips SFA 1ips SFA CAM12 AUTO SFA 1ips SFA 1ips SFA 5s 1ips SFA 30s 5s 1ips SFA 30s CAM13 AUTO EVSERFAY 1ips SFA 1ips SFA 5s 1ips SFA 30s CAM14 AUTO SFA 1ips SFA 1ips SFA 5s 1ips SFA 30s CAM15 AUTO EXTS.FA 1ips SFA 1ips SFA CAM16 AUTO SFA 1ips SFA 1ips SFA 5s 1ips SFA 30s 5s 1ips SFA 30s REC: P1 P2 P3 P4 EVT:O K P1 CP2ANCEP3L P4 The total of the recording rates between recording rates of pre-event recording and recording rates of post-event recording for each camera channel must be less than the recording rate as described in "Recording Rate for Each Recording Mode" above. The following are available for the image quality. SFA/SFB: Top quality (SUPER FINE) FQA/FQB: High quality (FINE) NQA/NQB: Standard quality (NORMAL) EXA/EXB: Low quality (EXTENDED) **A is suitable for less dynamic images. **B is suitable for more dynamic images. The following are available for the recording duration (only event pre-recording and event post-recording). 1 s - 10 s (in 1 second intervals) 20 s/30 s/1 - 10 m (in 1 minute intervals) 20 - 60 m (in 10 minutes intervals) MAN. (MANUAL): The recording duration will be as follows depending on the event type. • At a motion detection: For 8 seconds • At a video loss occurrence: During a video loss occur- rence • At a terminal alarm occurrence: During the supply of a signal • At a command alarm: For 8 seconds CON. (CONTINUE): Recording will be performed continu- ously until the ALARM RESET button is pressed. Notes: • Available recording duration for pre-event recording will differ depending on the settings of "Resolution" and "Recording Rate and Quality" for pre-event recording as below: Recording rate 0.1 0.2 0.3 0.4 0.5 1 1.7 2.5 4.2 5 6.3 8.3 12.5 25 50 FRAME 3D ON FIELD FRAME 3D OFF 5 m (min) 10 m (min) 2 m (min) 5 m (min) 1 m (min) 3 m (min) 1 m (min) 2 m (min) 1 m (min) 2 m (min) 30 s 1 m (min) 10 s 30 s 10 s 20 s 7 s 10 s 6 s 10 s 4 s 9 s 3 s 7 s 2 s 4 s 1 s 2 s - 1 s SIF 20 m (min) 10 m (min) 6 m (min) 5 m (min) 4 m (min) 2 m (min) 1 m (min) 30 s 20 s 20 s 10 s 10 s 9 s 4 s - 106