Panasonic WJHD316 WJHD309 User Guide - Page 107

• When a pre-recording area is created in an optional extension unit (WJ-HDE300 series), it is possible to perform pre-event recording for up to 60 minutes according to the resolution, recording rate and disk space for pre-event recording. Refer to page 135 for descriptions of how to create the pre-recording area. Pre-event recording for the camera channel that has the prerecording area in the extension unit will always be performed on the pre-recording area. • When the set pre-event recording duration is impossible to apply, recording mode section of pre-event recording will turn red. • When the recording rate is low, images may be recorded for a longer duration than the set pre-event recording duration. • Pre-event recording will not be performed for a camera channel whose post-event recording rate is OFF. Important: Pre-event recording image only just recorded will be deleted in the following cases: • When the SETUP MENU is closed after changing the settings • When post-event recording is newly performed • When the time zone of a schedule switched and record- ing had just started • When the date has been changed G [Event Program] Create event programs for an event occurrence Perform the settings of event action for each event type (motion detection, video loss, terminal/command alarm) or of auto copy. SETUP MENU Maintenance Switcher Recording Display Time Table REC Program Event Program Special Days I Event Program 1 I Event Program 2 I Event Program 3 I Event Program 4 Event Comm Schedule System SETUP SETUP SETUP SETUP LIVE SETUP MENU Maintenance Switcher Recording Display Event Comm Schedule System Time Table REC Program Event Program Special Days I Event Program 1 I Event Program 2 I Event Program 3 EIveEnvt ePnrot gArcatmion1 4 I VMD I Video Loss I Terminal/Command Alarm SETUP SETUP SETUP SETUP SETUP SETUP SETUP O K CANCEL LIVE 8 VMD Perform the settings of event action at a motion detection or the settings of the auto copy function. SETUP MENU Maintenance Switcher Recording Display Event Comm Time Table REC Program Event Program Special Days I Event Program 1 I Event Program 2 I Event Program 3 I EvVeMnDt Program 4 I Operation Mode I Auto Copy OK Schedule System SETUP SETUP SETUP SETUP ALARM OFF LIVE CANCEL Perform the settings for the following operation mode. Refer to page 45 for further information about each operation mode. ACT DET (Activity Detection Mode): Performs only recording, writing an event log and camera movement to a preset position at an event occurrence. Other event actions will not be performed. ALARM (Alarm Mode): Performs every event action according to the settings. Auto copy is the function to copy recorded images automatically onto the copy area of the hard disk or the DVDRAM disk. Select ON or OFF to enable or disable the auto copy function. ON: Enable the auto copy function OFF: Disable the auto copy function Important: • When "OFF" is selected for "Auto Copy" of "Basic Setup" on "System", the auto copy function will not work even though "ON" is selected for this setting. Select "HDD", "COPY 1" or "COPY 2" for "Auto Copy". • Images recorded (by pre-event recording) in the prerecording area in the extension unit will not be copied automatically. 8 Video Loss Perform the settings of an event action at a video loss or the settings of the auto copy function. The contents to be set are the same as the settings for "VMD" above. SETUP MENU Maintenance Switcher Recording Display Time Table REC Program Event Program Special Days I Event Program 1 I Event Program 2 I Event Program 3 VIideEoveLnotsPsrogram 4 I Operation Mode I Auto Copy Event Comm Schedule System SETUP SETUP SETUP SETUP ALARM OFF OK CANCEL LIVE 107