Panasonic WJHD316 WJHD309 User Guide - Page 122

8 Shutdown Time Select a waiting time before starting the internal processing against the power outage after an outage detection signal has been supplied to the unit from the following. 10 s/20 s/30 s/1 m/2 m/3 m/4 m/5 m 8 Auto Copy ON or OFF whether or not to copy recorded images to the copy area on the hard disk automatically. OFF: Does not copy automatically. ON: Copies recorded images to the copy area on the hard disk of this unit. Important: • When OFF is selected, the auto copy function at an event occurrence and emergency recording will not function. • The auto copy will not work if a DVD-RAM disk drive is not connected even though "COPY 1" or "COPY 2" is selected. • Images recorded (by pre-event recording) in the prerecording area in the extension unit will not be copied automatically. • When emergency recording/event recordings are performed frequently, it may be possible that the auto copy function does not function. • Images to be copied automatically will be 30 minute's worth of images recorded from the start of emergency recording/event recording. G [Time & Date] Setting of the date and time Perform the following settings of the time and date. SETUP MENU Maintenance Switcher Recording Display Event Comm Schedule System LIVE Basic Setup Time & Date User Regist. User Edit User Delete Host Regist. Host Edit Host Delete User Level Save/Load I Date Format DD.MMM.YY I Time Format 12H I Time & Date 1 . JAN . 03 12 00 : 00 AM SET I Auto Adjust Time Master Time I Summer Time(Day Light Saving) OFF 12 :00 AM AUTO I Summer Time(Day Light Saving)Table SETUP 8 Date Format Select a display format for the date from the following. (Ex. April 1, 2003) YY.MM.DD: 03.4.1 MMM.DD.YY: APR.1.03 DD.MMM.YY: 1.APR.03 8 Time Format Select a display format for the time from the following. (Ex. 3 o' clock in the afternoon) 12h: 3:00:00 PM 24h: 15:00:00 8 Time Setup Adjust the current time and date. Enter year, month, day, hour, minute and second in order, move the cursor to "SET" and press the SET button. Important: Recording will stop for around 4 seconds just after setting the date and time. 8 Auto Adjust Time Select a method for auto time adjustment from the following. When "MASTER" is selected, a signal will be supplied from the ALARM/CONTROL connector as the MASTER time (see below) at the specified time. OFF: Does not function. MASTER: A signal will be supplied from the ALARM/CON- TROL connector on the rear and the clock of the other devices will be adjusted with reference to the time of this unit. SLAVE: A signal will be supplied to the ALARM/CONTROL connector on the rear and the clock of this unit will be adjusted. Important: Recording will not be performed for around 4 seconds when changing the present time (accurate to within ±5 seconds) using the time adjustment input (pin no.20) of the ALARM/CONTROL connector on the rear panel. 8 Master Time Specify the time when supplying a signal from the ALARM/CONTROL connector. 8 Summer Time (Day Light Saving) Select the method of switching to summer time from the following. OFF: Does not function. ON: Applies summer time. AUTO: Applies summer time in accordance with the setting of summer time (see next page). 8 Summer Time (Day Light Saving) Table Do the following to specify the start time and date and the end time and date of summer time. [Screenshot 1] Start operation from the "Time & Date" menu. SETUP MENU Maintenance Switcher Recording Display Event Comm Schedule System LIVE Basic Setup Time & Date User Regist. User Edit User Delete Host Regist. Host Edit Host Delete User Level Save/Load I Date Format DD.MMM.YY I Time Format 12H I Time & Date 1 . JAN . 03 12 00 : 00 AM SET I Auto Adjust Time Master Time I Summer Time(Day Light Saving) OFF 12 :00 AM AUTO I Summer Time(Day Light Saving)Table SETUP 122