Panasonic WV-ST165 Operating Instructions - Page 118

11 Configure the settings relating to images and audio [Image/Audio] Note • • Panning, tilting and zooming operations can also be carried out on the [Image/Position] tab. Adjusted zoom and focus position for the auto pan function will be applied when [Set] button of "Start position" is clicked. [End position] SW395 SC385 SC384 Move the camera to the desired point to be set as the end point of the auto panning using the control pad/ buttons, and then click the [Set] button to register the position as the end position. Auto pan [Dwell time] Select a dwell time at the start point and the end point from the following. 5s/ 10s/ 20s/ 30s • Default: 5s [Speed] Select a speed for the auto panning from the following. 3°/s, 4°/s, 5°/s, 7°/s, 10°/s, 13°/s, 18°/s, 24°/s • Default: 13°/s IMPORTANT • When "Dwell time" or "Speed" is edited, it is necessary to click the [Set] button to apply them. Note • Even when the selected zoom factor is higher than 36x SW395 SC386 , the camera will start panning with 36x SW395 SC385 zoom factor. SC385 SC384 /72x SW396 SC384 /72x SW396 SC386 [Endless panning] SW396 SC386 The operations for panning can be set to the following Off: Pan between the left and right end position points. On(Clockwise): Pans clockwise. On(Counterclockwise): Pans counterclockwise. Default: Off [Zoom] buttons, [Focus] buttons, [Brightness] buttons, Control pad/buttons and [Go] button Refer to page 12 for descriptions of how to operate these buttons/pad. [Close] button Click this button to close the "Auto pan" setup menu. 11.6.6 Configure the settings relating to patrol ("Patrol" setup menu) (SW396/SC386) Click the [Setup>>] button of "Patrol" on the [Image/Position] tab of the "Image/Audio" page (®page 98). 118 Operating Instructions