Panasonic WV-ST165 Operating Instructions - Page 87
Unicast port2Audio], Multicast address], Multicast port], Multicast TTL/HOPLimit]
View all Panasonic WV-ST165 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
11 Configure the settings relating to images and audio [Image/Audio] [Unicast port2(Audio)]*2 Enter the unicast port number (used to transmit audio from the camera). • Available port number: 1024 - 50000 (Only even numbers are available.) • Default: - H.264(1): 33004 - H.264(2): 33014 [Multicast address]*3 Enter the multicast IP address. Images and audio will be transmitted to the designated IP address. • Available IPv4 address: 224.0.0.0 - 239.255.255.255 • Available IPv6 address: Multicast address starting with "FF" • Default: - H.264(1): 239.192.0.20 - H.264(2): 239.192.0.21 Note • Enter a multicast IP address after checking available multicast address. [Multicast port]*3 Enter the multicast port number (used to transmit images from the camera). • Available port number: 1024 - 50000 (Only even numbers are available.) • Default: 37004 Note • When audio is transmitted from the unit, the port number to be used will be the multicast port number plus "1000". [Multicast TTL/HOPLimit]*3 Enter a value for "Multicast TTL/HOPLimit". • Available value: 1-254 • Default: 16 IMPORTANT • When transmitting an H.264 image via a network, the transmitted image sometimes may not be displayed depending on the settings of a proxy server or a firewall. In this case, refer to the network administrator. • When two or more network interface cards are installed on the PC in use, the network interface card(s) not used for receiving images should be invalidated when displaying images using the multicast port. [Smoother live video display on the browser (buffering)] Perform settings to display camera images on the viewer software. • On: Images are temporarily stored on the computer and are displayed smoother. • Off: Images are displayed in real-time and are not stored on the computer. • Default: Off *1 SW396 SW395 SC386 SC385 *2 It is necessary to designate the unicast port number when "Unicast port (MANUAL)" is selected for "Transmission type". *3 It is necessary to designate the multicast IP address when "Multicast" is selected for "Transmission type". Operating Instructions 87