Panasonic WV-ST165 Operating Instructions - Page 161

16 Configure the settings of the servers [Server] 16 Configure the settings of the servers [Server] The settings relating to the mail server, the FTP server and the NTP server can be configured on this page. The "Server" page has 3 tabs; the [Mail] tab, the [FTP] tab and the [NTP] tab. 16.1 Configure the settings relating to the mail server [Mail] Click the [Mail] tab on the "Server" page. (®page 47, page 49) The settings relating to the mail server used to send the alarm mail can be configured on this page. IMPORTANT • When a terminal that receives e-mails is not compatible with UTF-8 encode, it is impossible to receive alarm mails correctly. [SMTP server address] Enter the IP address or the host name of the SMTP server used to send e-mails. • Available number of characters: 1 - 128 characters • Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the hyphen (-). [SMTP port] Enter the port number to which e-mails are sent. • Available port number: 1-65535 • Default: 25 The following port numbers are unavailable since they are already in use. 20, 21, 23, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670 [POP server address] When "POP before SMTP" is selected for "Type", enter the IP address or the host name of the POP server. • Available number of characters: 1 - 128 characters • Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the hyphen (-). Operating Instructions 161