Panasonic WV-ST165 Operating Instructions - Page 157

15 Configure the settings relating to the authentication [User mng.] Note • • When the [Authentication] setting has been changed, close the web browser, and then access the camera again. For other devices such as other i-PRO series cameras or network disk recorders, unless otherwise stated, Digest authentication is not supported. (As of August 2011) [User name] Enter a user name. • Available number of characters: 1 - 32 characters • Unavailable characters Default: None (blank) [Password] [Retype password] Enter a password. • Available number of characters: 4 - 32 characters • Unavailable characters: " & • Default: None (blank) Note • When the user name already in use is entered and the [Set] button is clicked, the respective user information will be overwritten. [Access level] Select the access level of the user from the following. • 1. Administrator: Allowed all available operations of the camera. • 2. Camera control: Allowed to display images from the camera and to control the camera. The camera setting configuration is unavailable. • 3. Live only: Only displaying live images is available. The camera setting configuration and camera control are unavailable. • Default: 3. Live only [User check] From the pull-down menu of "User check", the registered user can be selected and the selected user's information can be checked. The registered user will be displayed with the access level. (Example: admin [1]) To delete the registered user, click the [Delete] button after selecting the user to be deleted. 15.2 Configure the settings relating to the host authentication [Host auth.] Click the [Host auth.] tab on the "User mng." page. (®page 47, page 49) Operating Instructions 157